Takeoffs, Landings, and Go-Arounds
AI.VII · 15 Tasks · 463 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
AI.VII.A: Normal Takeoff and Climb
36 elements
- AI.VII.A.K1: Procedures for normal and crosswind takeoff.
- AI.VII.A.K2: Effects of atmospheric conditions, including wind, on takeoff and climb performance.
- AI.VII.A.K3: Best angle of climb speed (VX) and best rate of climb speed (VY).
- AI.VII.A.K4: Appropriate airplane configuration.
- AI.VII.A.K5: Common errors related to this Task.
- AI.VII.A.R1: Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.A.R2: Effects of: Members
- AI.VII.A.R2a: a. Crosswind
- AI.VII.A.R2b: b. Windshear
- AI.VII.A.R2c: c. Tailwind
- AI.VII.A.R2d: d. Wake turbulence
- AI.VII.A.R2e: e. Takeoff surface/condition
- AI.VII.A.R3: Abnormal operations, including planning for: Members
- AI.VII.A.R3a: a. Rejected takeoff
- AI.VII.A.R3b: b. Potential engine failure in takeoff/climb phase of flight
- AI.VII.A.R4: Collision hazards.
- AI.VII.A.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.A.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.A.R7: Runway incursion.
- AI.VII.A.S1: Complete the appropriate checklist(s).
- AI.VII.A.S2: Make radio calls as appropriate.
- AI.VII.A.S3: Verify assigned/correct runway or takeoff path.
- AI.VII.A.S4: Determine wind direction with or without visible wind direction indicators.
- AI.VII.A.S5: Position the flight controls for the existing wind, if applicable.
- AI.VII.A.S6: Clear the area, taxi into takeoff position, and align the airplane on the runway centerline (ASEL, AMEL) or takeoff path (ASES, AMES).
- AI.VII.A.S7: Retract the water rudders, as appropriate (ASES, AMES).
- AI.VII.A.S8: Advance the throttle smoothly to takeoff power and confirm proper engine and flight instrument indications prior to rotation.
- AI.VII.A.S9: Avoid excessive water spray on the propeller(s) (ASES, AMES).
- AI.VII.A.S10: Establish and maintain the most efficient planing/lift-off attitude, and correct for porpoising or skipping (ASES, AMES).
- AI.VII.A.S11: Rotate and lift off at the recommended airspeed and accelerate to VY.
- AI.VII.A.S12: Establish a pitch attitude to maintain the manufacturer’s recommended speed or VY, ±5 knots.
- AI.VII.A.S13: Configure the airplane in accordance with manufacturer’s guidance.
- AI.VII.A.S14: Maintain VY ±5 knots to a safe maneuvering altitude.
- AI.VII.A.S15: Maintain directional control and proper wind-drift correction throughout takeoff and climb.
- AI.VII.A.S16: Comply with noise abatement procedures, as applicable.
- AI.VII.A.S17: Analyze and correct common errors related to this Task.
AI.VII.B: Normal Approach and Landing
30 elements
- AI.VII.B.K1: Procedures for normal and crosswind approach and landing.
- AI.VII.B.K2: A stabilized approach, including energy management concepts.
- AI.VII.B.K3: Effects of atmospheric conditions, including wind, on approach and landing performance.
- AI.VII.B.K4: Wind correction techniques on approach and landing.
- AI.VII.B.K5: Common errors related to this Task.
- AI.VII.B.R1: Selection of runway/landing surface, approach path, and touchdown area based on pilot capability, aircraft performance and limitations, avai
- AI.VII.B.R2: Effects of: Members
- AI.VII.B.R2a: a. Crosswind
- AI.VII.B.R2b: b. Windshear
- AI.VII.B.R2c: c. Tailwind
- AI.VII.B.R2d: d. Wake turbulence
- AI.VII.B.R2e: e. Landing surface/condition
- AI.VII.B.R3: Planning for: Members
- AI.VII.B.R3a: a. Rejected landing and go-around
- AI.VII.B.R3b: b. Land and hold short operations (LAHSO)
- AI.VII.B.R4: Collision hazards.
- AI.VII.B.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.B.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.B.S1: Complete the appropriate checklist(s).
- AI.VII.B.S2: Make radio calls as appropriate.
- AI.VII.B.S3: Ensure the airplane is aligned with the correct/assigned runway or landing surface.
- AI.VII.B.S4: Scan the runway or landing surface and adjoining area for traffic and obstructions.
- AI.VII.B.S5: Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
- AI.VII.B.S6: Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintai
- AI.VII.B.S7: Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 times the stalling speed or the minimum steady fligh
- AI.VII.B.S8: Maintain directional control and appropriate crosswind correction throughout the approach and landing.
- AI.VII.B.S9: Make smooth, timely, and correct control application during round out and touchdown.
- AI.VII.B.S10: Touch down at a proper pitch attitude, within 200 feet beyond or on the specified point, with no side drift, and with the airplane’s longitu
- AI.VII.B.S11: Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result i
- AI.VII.B.S12: Analyze and correct common errors related to this Task.
AI.VII.C: Soft-Field Takeoff and Climb (ASEL)
36 elements
- AI.VII.C.K1: Purpose of and procedures for soft-field takeoff and climb.
- AI.VII.C.K2: Effects of atmospheric conditions, including wind, on takeoff and climb performance.
- AI.VII.C.K3: Best angle of climb speed (VX) and best rate of climb speed (VY).
- AI.VII.C.K4: Appropriate airplane configuration.
- AI.VII.C.K5: Ground effect.
- AI.VII.C.K6: Importance of weight transfer from wheels to wings.
- AI.VII.C.K7: Left turning tendencies.
- AI.VII.C.K8: Common errors related to this Task.
- AI.VII.C.R1: Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.C.R2: Effects of: Members
- AI.VII.C.R2a: a. Crosswind
- AI.VII.C.R2b: b. Windshear
- AI.VII.C.R2c: c. Tailwind
- AI.VII.C.R2d: d. Wake turbulence
- AI.VII.C.R2e: e. Runway surface/condition
- AI.VII.C.R3: Abnormal operations, including planning for: Members
- AI.VII.C.R3a: a. Rejected takeoff
- AI.VII.C.R3b: b. Potential engine failure in takeoff/climb phase of flight
- AI.VII.C.R4: Collision hazards.
- AI.VII.C.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.C.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.C.S1: Complete the appropriate checklist(s).
- AI.VII.C.S2: Make radio calls as appropriate.
- AI.VII.C.S3: Verify assigned/correct runway.
- AI.VII.C.S4: Determine wind direction with or without visible wind direction indicators.
- AI.VII.C.S5: Position the flight controls for the existing wind, if applicable.
- AI.VII.C.S6: Clear the area, maintain necessary flight control inputs, taxi into takeoff position and align the airplane on the runway centerline without
- AI.VII.C.S7: Confirm takeoff power and proper engine and flight instrument indications.
- AI.VII.C.S8: Establish and maintain a pitch attitude that transfers the weight of the airplane from the wheels to the wings as rapidly as possible. Members
- AI.VII.C.S9: Lift off at the lowest possible airspeed and remain in ground effect while accelerating to VX or VY, as appropriate.
- AI.VII.C.S10: Establish a pitch attitude for VX or VY, as appropriate, and maintain selected airspeed ±5 knots during the climb.
- AI.VII.C.S11: Configure the airplane after a positive rate of climb has been verified or in accordance with airplane manufacturer’s instructions.
- AI.VII.C.S12: Maintain VX or VY, as appropriate, ±5 knots to a safe maneuvering altitude.
- AI.VII.C.S13: Maintain directional control and proper wind-drift correction throughout takeoff and climb.
- AI.VII.C.S14: Comply with noise abatement procedures, as applicable.
- AI.VII.C.S15: Analyze and correct common errors related to this Task. Members
AI.VII.D: Soft-Field Approach and Landing (ASEL)
32 elements
- AI.VII.D.K1: Purpose of and procedures for soft-field approach and landing.
- AI.VII.D.K2: A stabilized approach, including energy management concepts.
- AI.VII.D.K3: Effects of atmospheric conditions, including wind, on approach and landing performance.
- AI.VII.D.K4: Wind correction techniques on approach and landing.
- AI.VII.D.K5: Common errors related to this Task.
- AI.VII.D.R1: Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.D.R2: Effects of: Members
- AI.VII.D.R2a: a. Crosswind
- AI.VII.D.R2b: b. Windshear
- AI.VII.D.R2c: c. Tailwind
- AI.VII.D.R2d: d. Wake turbulence
- AI.VII.D.R2e: e. Runway surface/condition
- AI.VII.D.R3: Planning for: Members
- AI.VII.D.R3a: a. Rejected landing and go-around
- AI.VII.D.R3b: b. Land and hold short operations (LAHSO)
- AI.VII.D.R4: Collision hazards.
- AI.VII.D.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.D.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.D.S1: Complete the appropriate checklist(s).
- AI.VII.D.S2: Make radio calls as appropriate.
- AI.VII.D.S3: Ensure the airplane is aligned with the correct/assigned runway.
- AI.VII.D.S4: Scan the landing runway and adjoining area for traffic and obstructions.
- AI.VII.D.S5: Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
- AI.VII.D.S6: Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintai
- AI.VII.D.S7: Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 times the stalling speed or the minimum steady fligh
- AI.VII.D.S8: Maintain directional control and appropriate crosswind correction throughout the approach and landing.
- AI.VII.D.S9: Make smooth, timely, and correct control inputs during the round out and touchdown, and, for tricycle gear airplanes, keep the nose wheel of
- AI.VII.D.S10: Touch down at a proper pitch attitude with minimum sink rate, no side drift, and with the airplane’s longitudinal axis aligned with the cent
- AI.VII.D.S11: Maintain elevator as recommended by manufacturer during rollout and exit the “soft” area at a speed that would preclude sinking into the sur
- AI.VII.D.S12: Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result i
- AI.VII.D.S13: Maintain proper position of the flight controls and sufficient speed to taxi while on the soft surface.
- AI.VII.D.S14: Analyze and correct common errors related to this Task. Members
AI.VII.E: Short-Field Takeoff and Maximum Performance Climb (ASEL, AMEL)
34 elements
- AI.VII.E.K1: Purpose of and procedures for short-field takeoff and maximum performance climb.
- AI.VII.E.K2: Effects of atmospheric conditions, including wind, on takeoff and climb performance.
- AI.VII.E.K3: Best angle of climb speed (VX) and best rate of climb speed (VY).
- AI.VII.E.K4: Appropriate airplane configuration.
- AI.VII.E.K5: Common errors related to this Task.
- AI.VII.E.R1: Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.E.R2: Effects of: Members
- AI.VII.E.R2a: a. Crosswind
- AI.VII.E.R2b: b. Windshear
- AI.VII.E.R2c: c. Tailwind
- AI.VII.E.R2d: d. Wake turbulence
- AI.VII.E.R2e: e. Landing surface/condition
- AI.VII.E.R3: Abnormal operations, including planning for: Members
- AI.VII.E.R3a: a. Rejected takeoff Members
- AI.VII.E.R3b: b. Potential engine failure in takeoff/climb phase of flight
- AI.VII.E.R4: Collision hazards.
- AI.VII.E.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.E.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.E.S1: Complete the appropriate checklist(s).
- AI.VII.E.S2: Make radio calls as appropriate.
- AI.VII.E.S3: Verify assigned/correct runway.
- AI.VII.E.S4: Determine wind direction with or without visible wind direction indicators.
- AI.VII.E.S5: Position the flight controls for the existing wind, if applicable.
- AI.VII.E.S6: Clear the area, taxi into takeoff position, and align the airplane on the runway centerline utilizing maximum available takeoff area.
- AI.VII.E.S7: Apply brakes while setting engine power to achieve maximum performance.
- AI.VII.E.S8: Confirm takeoff power prior to brake release and verify proper engine and flight instrument indications prior to rotation.
- AI.VII.E.S9: Rotate and lift off at the recommended airspeed and accelerate to the recommended obstacle clearance airspeed or VX, ±5 knots.
- AI.VII.E.S10: Establish a pitch attitude to maintain the recommended obstacle clearance airspeed or VX, ±5 knots until the obstacle is cleared or until th
- AI.VII.E.S11: Establish a pitch attitude for VY and accelerate to VY ±5 knots after clearing the obstacle or at 50 feet above ground level (AGL) if simula
- AI.VII.E.S12: Configure the airplane in accordance with the manufacturer’s guidance after a positive rate of climb has been verified.
- AI.VII.E.S13: Maintain VY ±5 knots to a safe maneuvering altitude.
- AI.VII.E.S14: Maintain directional control and proper wind-drift correction throughout takeoff and climb.
- AI.VII.E.S15: Comply with noise abatement procedures, as applicable.
- AI.VII.E.S16: Analyze and correct common errors related to this Task.
AI.VII.F: Short-Field Approach and Landing (ASEL, AMEL)
31 elements
- AI.VII.F.K1: Purpose of and procedures for short-field approach and landing.
- AI.VII.F.K2: A stabilized approach, including energy management concepts.
- AI.VII.F.K3: Effects of atmospheric conditions, including wind, on approach and landing performance.
- AI.VII.F.K4: Wind correction techniques on approach and landing.
- AI.VII.F.K5: Common errors related to this Task.
- AI.VII.F.R1: Selection of runway based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.F.R2: Effects of: Members
- AI.VII.F.R2a: a. Crosswind
- AI.VII.F.R2b: b. Windshear
- AI.VII.F.R2c: c. Tailwind
- AI.VII.F.R2d: d. Wake turbulence
- AI.VII.F.R2e: e. Landing surface/condition
- AI.VII.F.R3: Planning for: Members
- AI.VII.F.R3a: a. Rejected landing and go-around
- AI.VII.F.R3b: b. Land and hold short operations (LAHSO)
- AI.VII.F.R4: Collision hazards.
- AI.VII.F.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.F.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.F.S1: Complete the appropriate checklist(s).
- AI.VII.F.S2: Make radio calls as appropriate.
- AI.VII.F.S3: Ensure the airplane is aligned with the correct/assigned runway.
- AI.VII.F.S4: Scan the landing runway and adjoining area for traffic and obstructions.
- AI.VII.F.S5: Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
- AI.VII.F.S6: Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintai
- AI.VII.F.S7: Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 times the stalling speed or the minimum steady fligh
- AI.VII.F.S8: Maintain directional control and appropriate crosswind correction throughout the approach and landing.
- AI.VII.F.S9: Make smooth, timely, and correct control application before, during, and after touchdown.
- AI.VII.F.S10: Touch down at a proper pitch attitude within 100 feet beyond or on the specified point, threshold markings, or runway numbers, with no side
- AI.VII.F.S11: Use manufacturer’s recommended procedures for airplane configuration and braking.
- AI.VII.F.S12: Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result i
- AI.VII.F.S13: Analyze and correct common errors related to this Task.
AI.VII.G: Confined Area Takeoff and Maximum Performance Climb (ASES, AMES)
37 elements
- AI.VII.G.K1: Purpose of and procedures for confined area takeoff and maximum performance climb.
- AI.VII.G.K2: Effects of atmospheric conditions, including wind, on takeoff and climb performance.
- AI.VII.G.K3: Best angle of climb speed (VX) and best rate of climb speed (VY).
- AI.VII.G.K4: Appropriate airplane configuration.
- AI.VII.G.K5: Effects of water surface.
- AI.VII.G.K6: Common errors related to this Task.
- AI.VII.G.R1: Selection of takeoff path based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.G.R2: Effects of: Members
- AI.VII.G.R2a: a. Crosswind
- AI.VII.G.R2b: b. Windshear
- AI.VII.G.R2c: c. Tailwind
- AI.VII.G.R2d: d. Wake turbulence
- AI.VII.G.R2e: e. Water surface/condition
- AI.VII.G.R3: Abnormal operations, including planning for: Members
- AI.VII.G.R3a: a. Rejected takeoff
- AI.VII.G.R3b: b. Potential engine failure in takeoff/climb phase of flight
- AI.VII.G.R4: Collision hazards.
- AI.VII.G.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.G.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.G.S1: Complete the appropriate checklist(s).
- AI.VII.G.S2: Make radio calls as appropriate.
- AI.VII.G.S3: Verify assigned/correct takeoff path.
- AI.VII.G.S4: Determine wind direction with or without visible wind direction indicators.
- AI.VII.G.S5: Position the flight controls for the existing wind, if applicable.
- AI.VII.G.S6: Clear the area, taxi into takeoff position utilizing maximum available takeoff area, and align the airplane on the takeoff path.
- AI.VII.G.S7: Retract the water rudders, as appropriate.
- AI.VII.G.S8: Establish a pitch attitude that maintains the most efficient planing/lift-off attitude and correct for porpoising and skipping.
- AI.VII.G.S9: Advance the throttle smoothly to takeoff power and confirm proper engine and flight instrument indications prior to rotation.
- AI.VII.G.S10: Avoid excessive water spray on the propeller(s).
- AI.VII.G.S11: Rotate and lift off at the recommended airspeed, and accelerate to the recommended obstacle clearance airspeed or VX.
- AI.VII.G.S12: Establish a pitch attitude to maintain the recommended obstacle clearance airspeed or VX, ±5 knots until the obstacle is cleared or until th
- AI.VII.G.S13: Establish a pitch attitude for VY and accelerate to VY ±5 knots after clearing the obstacle or at 50 feet above ground level (AGL) if simula
- AI.VII.G.S14: Retract flaps, if extended, after a positive rate of climb has been verified or in accordance with airplane manufacturer’s guidance.
- AI.VII.G.S15: Maintain VY ±5 knots to a safe maneuvering altitude.
- AI.VII.G.S16: Maintain directional control and proper wind-drift correction throughout takeoff and climb.
- AI.VII.G.S17: Comply with noise abatement procedures, as applicable.
- AI.VII.G.S18: Analyze and correct common errors related to this Task.
AI.VII.H: Confined Area Approach and Landing (ASES, AMES)
30 elements
- AI.VII.H.K1: Purpose of and procedures for confined area approach and landing.
- AI.VII.H.K2: A stabilized approach, including energy management concepts.
- AI.VII.H.K3: Effects of atmospheric conditions, including wind, on approach and landing performance.
- AI.VII.H.K4: Wind correction techniques on approach and landing.
- AI.VII.H.K5: Common errors related to this Task.
- AI.VII.H.R1: Selection of approach path and touchdown area based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.H.R2: Effects of: Members
- AI.VII.H.R2a: a. Crosswind
- AI.VII.H.R2b: b. Windshear
- AI.VII.H.R2c: c. Tailwind
- AI.VII.H.R2d: d. Wake turbulence
- AI.VII.H.R2e: e. Water surface/condition
- AI.VII.H.R3: Planning for a go-around and rejected landing.
- AI.VII.H.R4: Collision hazards.
- AI.VII.H.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.H.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.H.S1: Complete the appropriate checklist(s).
- AI.VII.H.S2: Make radio calls as appropriate.
- AI.VII.H.S3: Ensure the airplane is aligned for an approach to the correct/assigned landing surface.
- AI.VII.H.S4: Scan the landing area for traffic and obstructions.
- AI.VII.H.S5: Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
- AI.VII.H.S6: Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintai
- AI.VII.H.S7: Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 VSO, +10/-5 knots with gust factor applied.
- AI.VII.H.S8: Maintain directional control and appropriate crosswind correction throughout the approach and landing.
- AI.VII.H.S9: Make smooth, timely, and correct control application before, during, and after touchdown.
- AI.VII.H.S10: Contact the water at the recommended airspeed with a proper pitch attitude for the surface conditions.
- AI.VII.H.S11: Touch down at a proper pitch attitude, within 100 feet beyond or on the specified point, with no side drift, minimum float, and with the air
- AI.VII.H.S12: Execute a timely go-around if the approach cannot be made within the tolerances specified above or for any other condition that may result i
- AI.VII.H.S13: Apply elevator control as necessary to stop in the shortest distance consistent with safety.
- AI.VII.H.S14: Analyze and correct common errors related to this Task.
AI.VII.I: Glassy Water Takeoff and Climb (ASES, AMES)
29 elements
- AI.VII.I.K1: Purpose of and procedures for glassy water takeoff and climb.
- AI.VII.I.K2: Effects of atmospheric conditions, including wind, on takeoff and climb performance.
- AI.VII.I.K3: Best angle of climb speed (VX) and best rate of climb speed (VY).
- AI.VII.I.K4: Appropriate airplane configuration.
- AI.VII.I.K5: Appropriate use of glassy water takeoff and climb technique.
- AI.VII.I.K6: Common errors related to this Task.
- AI.VII.I.R1: Selection of takeoff path based on pilot capability, airplane performance and limitations, and available distance.
- AI.VII.I.R2: Water surface/condition.
- AI.VII.I.R3: Abnormal operations, including planning for: Members
- AI.VII.I.R3a: a. Rejected takeoff
- AI.VII.I.R3b: b. Potential engine failure in takeoff/climb phase of flight
- AI.VII.I.R4: Collision hazards.
- AI.VII.I.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.I.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.I.R7: Gear position in an amphibious airplane.
- AI.VII.I.S1: Complete the appropriate checklist(s).
- AI.VII.I.S2: Make radio calls as appropriate.
- AI.VII.I.S3: Position flight controls and configure the aircraft for the existing conditions.
- AI.VII.I.S4: Clear the area, select appropriate takeoff path considering surface hazards or vessels and surface conditions.
- AI.VII.I.S5: Retract the water rudders, as appropriate.
- AI.VII.I.S6: Advance the throttle smoothly to takeoff power and confirm proper engine and flight instrument indications prior to rotation.
- AI.VII.I.S7: Establish and maintain an appropriate planing attitude, directional control, and correct for porpoising, skipping, and increase in water dra
- AI.VII.I.S8: Avoid excessive water spray on the propeller(s).
- AI.VII.I.S9: Use appropriate techniques to lift seaplane from the water considering surface conditions.
- AI.VII.I.S10: Establish proper attitude/airspeed and accelerate to VY ±5 knots during the climb.
- AI.VII.I.S11: Configure the airplane after a positive rate of climb has been verified or in accordance with airplane manufacturer’s instructions.
- AI.VII.I.S12: Maintain VY ±5 knots to a safe maneuvering altitude.
- AI.VII.I.S13: Maintain directional control throughout takeoff and climb.
- AI.VII.I.S14: Analyze and correct common errors related to this Task.
AI.VII.J: Glassy Water Approach and Landing (ASES, AMES)
22 elements
- AI.VII.J.K1: Purpose of and procedures for glassy water approach and landing.
- AI.VII.J.K2: A stabilized approach, including energy management concepts.
- AI.VII.J.K3: Effects of atmospheric conditions, including wind, on approach and landing performance.
- AI.VII.J.K4: When and why glassy water techniques are used.
- AI.VII.J.K5: Common errors related to this Task.
- AI.VII.J.R1: Selection of approach path and touchdown area based on pilot capability, airplane performance and limitations, and available distance.
- AI.VII.J.R2: Water surface/condition.
- AI.VII.J.R3: Planning for a go-around and rejected landing.
- AI.VII.J.R4: Collision hazards.
- AI.VII.J.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.J.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.J.R7: Gear position in an amphibious airplane.
- AI.VII.J.S1: Complete the appropriate checklist(s).
- AI.VII.J.S2: Make radio calls as appropriate.
- AI.VII.J.S3: Scan the landing area for traffic and obstructions.
- AI.VII.J.S4: Select a proper approach and landing path considering the landing surface, visual attitude references, water depth, and collision hazards.
- AI.VII.J.S5: Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintai
- AI.VII.J.S6: Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 VSO, ±5 knots.
- AI.VII.J.S7: Make smooth, timely, and correct power and control adjustments to maintain proper pitch attitude and rate of descent to touchdown.
- AI.VII.J.S8: Contact the water in a proper pitch attitude, and slow to idle taxi speed.
- AI.VII.J.S9: Maintain directional control throughout the approach and landing.
- AI.VII.J.S10: Analyze and correct common errors related to this Task.
AI.VII.K: Rough Water Takeoff and Climb (ASES, AMES)
35 elements
- AI.VII.K.K1: Purpose of and procedures for a rough water takeoff and climb.
- AI.VII.K.K2: Effects of atmospheric conditions, including wind, on takeoff and climb performance.
- AI.VII.K.K3: Best angle of climb speed (VX) and best rate of climb speed (VY).
- AI.VII.K.K4: Appropriate airplane configuration.
- AI.VII.K.K5: Appropriate use of rough water takeoff and climb technique.
- AI.VII.K.K6: Common errors related to this Task.
- AI.VII.K.R1: Selection of takeoff path based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.K.R2: Effects of: Members
- AI.VII.K.R2a: a. Crosswind
- AI.VII.K.R2b: b. Windshear
- AI.VII.K.R2c: c. Tailwind
- AI.VII.K.R2d: d. Wake turbulence
- AI.VII.K.R2e: e. Water surface/condition
- AI.VII.K.R3: Abnormal operations, including planning for: Members
- AI.VII.K.R3a: a. Rejected takeoff
- AI.VII.K.R3b: b. Potential engine failure in takeoff/climb phase of flight
- AI.VII.K.R4: Collision hazards.
- AI.VII.K.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.K.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.K.R7: Gear position in an amphibious airplane.
- AI.VII.K.S1: Complete the appropriate checklist(s).
- AI.VII.K.S2: Make radio calls as appropriate.
- AI.VII.K.S3: Verify assigned/correct takeoff path.
- AI.VII.K.S4: Determine wind direction with or without visible wind direction indicators.
- AI.VII.K.S5: Position flight controls and configure the airplane for the existing conditions.
- AI.VII.K.S6: Clear the area, select an appropriate takeoff path considering wind, swells, surface hazards, or vessels.
- AI.VII.K.S7: Retract the water rudders, as appropriate.
- AI.VII.K.S8: Advance the throttle smoothly to takeoff power and confirm proper engine and flight instrument indications prior to rotation.
- AI.VII.K.S9: Establish and maintain an appropriate planing attitude, directional control, and correct for porpoising, skipping, and increase in water dra
- AI.VII.K.S10: Avoid excessive water spray on the propeller(s).
- AI.VII.K.S11: Lift off at minimum airspeed and accelerate to VY ±5 knots before leaving ground effect.
- AI.VII.K.S12: Configure the airplane after a positive rate of climb has been verified or in accordance with airplane manufacturer’s instructions.
- AI.VII.K.S13: Maintain VY ±5 knots to a safe maneuvering altitude.
- AI.VII.K.S14: Maintain directional control and proper wind-drift correction throughout takeoff and climb.
- AI.VII.K.S15: Analyze and correct common errors related to this Task.
AI.VII.L: Rough Water Approach and Landing (ASES, AMES)
29 elements
- AI.VII.L.K1: Purpose of and procedures for rough water approach and landing.
- AI.VII.L.K2: A stabilized approach, including energy management concepts.
- AI.VII.L.K3: Effects of atmospheric conditions, including wind, on approach and landing performance.
- AI.VII.L.K4: Wind correction techniques on approach and landing.
- AI.VII.L.K5: When and why rough water techniques are used.
- AI.VII.L.K6: Common errors related to this Task.
- AI.VII.L.R1: Selection of approach path and touchdown area based on pilot capability, airplane performance and limitations, available distance, and wind.
- AI.VII.L.R2: Effects of: Members
- AI.VII.L.R2a: a. Crosswind
- AI.VII.L.R2b: b. Windshear
- AI.VII.L.R2c: c. Tailwind
- AI.VII.L.R2d: d. Wake turbulence
- AI.VII.L.R2e: e. Water surface/condition
- AI.VII.L.R3: Planning for a go-around and rejected landing.
- AI.VII.L.R4: Collision hazards.
- AI.VII.L.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.L.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.L.R7: Gear position in an amphibious airplane.
- AI.VII.L.S1: Complete the appropriate checklist(s).
- AI.VII.L.S2: Make radio calls as appropriate.
- AI.VII.L.S3: Ensure the airplane is aligned with the correct/assigned waterway.
- AI.VII.L.S4: Scan the landing area for traffic and obstructions.
- AI.VII.L.S5: Select and aim for a suitable touchdown point considering the wind conditions, landing surface, and obstructions.
- AI.VII.L.S6: Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintai
- AI.VII.L.S7: Maintain manufacturer’s published approach airspeed or in its absence not more than 1.3 times the stalling speed or the minimum steady fligh
- AI.VII.L.S8: Maintain directional control and appropriate crosswind correction throughout the approach and landing.
- AI.VII.L.S9: Make smooth, timely, and correct power and control adjustments to maintain proper pitch attitude and rate of descent to touchdown.
- AI.VII.L.S10: Contact the water in a proper pitch attitude, considering the type of rough water.
- AI.VII.L.S11: Analyze and correct common errors related to this Task.
AI.VII.M: Slip to a Landing (ASEL, ASES)
31 elements
- AI.VII.M.K1: Purpose of and procedures for forward or side slip to a landing.
- AI.VII.M.K2: Concepts of energy management during a forward or side slip approach.
- AI.VII.M.K3: Effects of atmospheric conditions, including wind, on approach and landing performance.
- AI.VII.M.K4: Wind correction techniques during a forward or side slip.
- AI.VII.M.K5: Common errors related to this Task.
- AI.VII.M.R1: Selection of runway/landing surface, approach path, and touchdown area based on pilot capability, aircraft performance and limitations, avai
- AI.VII.M.R2: Effects of: Members
- AI.VII.M.R2a: a. Crosswind
- AI.VII.M.R2b: b. Windshear
- AI.VII.M.R2c: c. Tailwind
- AI.VII.M.R2d: d. Wake turbulence
- AI.VII.M.R2e: e. Landing surface/condition
- AI.VII.M.R3: Planning for: Members
- AI.VII.M.R3a: a. Rejected landing and go-around
- AI.VII.M.R3b: b. Land and hold short operations (LAHSO)
- AI.VII.M.R4: Collision hazards.
- AI.VII.M.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.M.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.M.R7: Forward slip operations, including fuel flowage, tail stalls with flaps, and airspeed control.
- AI.VII.M.R8: Surface contact with the airplane’s longitudinal axis misaligned.
- AI.VII.M.R9: Unstable approach.
- AI.VII.M.S1: Complete the appropriate checklist(s).
- AI.VII.M.S2: Make radio calls as appropriate.
- AI.VII.M.S3: Plan and follow a flightpath to the selected landing area considering altitude, wind, terrain, and obstructions.
- AI.VII.M.S4: Select the most suitable touchdown point based on wind, landing surface, obstructions, and airplane limitations.
- AI.VII.M.S5: Position airplane on downwind leg, parallel to landing runway or selected landing surface.
- AI.VII.M.S6: Configure the airplane correctly.
- AI.VII.M.S7: As necessary, correlate crosswind with direction of slip and transition to sideslip as appropriate before touchdown.
- AI.VII.M.S8: Touch down at a proper pitch attitude, within 400 feet beyond or on the specified point, with no side drift, and with the airplane’s longitu
- AI.VII.M.S9: Maintain a ground track aligned with the runway center/landing path.
- AI.VII.M.S10: Analyze and correct common errors related to this Task.
AI.VII.N: Go-Around/Rejected Landing
23 elements
- AI.VII.N.K1: Purpose of and procedures for go-around or rejected landing.
- AI.VII.N.K2: A stabilized approach, including energy management concepts.
- AI.VII.N.K3: Effects of atmospheric conditions, including wind and density altitude, on a go-around or rejected landing.
- AI.VII.N.K4: Wind correction techniques on takeoff/departure and approach/landing.
- AI.VII.N.K5: Common errors related to this Task.
- AI.VII.N.R1: Delayed recognition of the need for a go-around/rejected landing. Members
- AI.VII.N.R2: Delayed performance of a go-around at low altitude.
- AI.VII.N.R3: Power application.
- AI.VII.N.R4: Configuring the airplane.
- AI.VII.N.R5: Collision hazards.
- AI.VII.N.R6: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.N.R7: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.N.R8: Managing a go-around/rejected landing after accepting a LAHSO clearance.
- AI.VII.N.R9: Runway incursion.
- AI.VII.N.S1: Complete the appropriate checklist(s).
- AI.VII.N.S2: Make radio calls as appropriate.
- AI.VII.N.S3: Make a timely decision to discontinue the approach to landing.
- AI.VII.N.S4: Apply takeoff power immediately and transition to climb pitch attitude for VX or VY as appropriate ±5 knots.
- AI.VII.N.S5: Configure the airplane after a positive rate of climb has been verified or in accordance with airplane manufacturer’s instructions.
- AI.VII.N.S6: Maneuver to the side of the runway/landing area when necessary to clear and avoid conflicting traffic.
- AI.VII.N.S7: Maintain VY ±5 knots to a safe maneuvering altitude.
- AI.VII.N.S8: Maintain directional control and proper wind-drift correction throughout the climb.
- AI.VII.N.S9: Analyze and correct common errors related to this Task.
AI.VII.O: Power-Off 180° Accuracy Approach and Landing (ASEL, ASES)
28 elements
- AI.VII.O.K1: Purpose of and procedures for proper 180° accuracy approach and landing.
- AI.VII.O.K2: A stabilized approach, including energy management concepts. Members
- AI.VII.O.K3: Effects of atmospheric conditions, including wind, on approach and landing.
- AI.VII.O.K4: Wind correction techniques on approach and landing.
- AI.VII.O.K5: Common errors related to this Task. Members
- AI.VII.O.R1: Selection of runway/landing surface, approach path, and touchdown area based on pilot capability, aircraft performance and limitations, avai
- AI.VII.O.R2: Effects of: Members
- AI.VII.O.R2a: a. Crosswind
- AI.VII.O.R2b: b. Windshear
- AI.VII.O.R2c: c. Tailwind
- AI.VII.O.R2d: d. Wake turbulence
- AI.VII.O.R2e: e. Landing surface/condition
- AI.VII.O.R3: Planning for: Members
- AI.VII.O.R3a: a. Rejected landing and go-around
- AI.VII.O.R3b: b. Land and hold short operations (LAHSO)
- AI.VII.O.R4: Collision hazards.
- AI.VII.O.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.VII.O.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.VII.O.R7: Forward slip operations, including fuel flowage, tail stalls with flaps, and airspeed control.
- AI.VII.O.S1: Complete the appropriate checklist(s).
- AI.VII.O.S2: Make radio calls as appropriate.
- AI.VII.O.S3: Plan and follow a flightpath to the selected landing area considering altitude, wind, terrain, and obstructions.
- AI.VII.O.S4: Select the most suitable touchdown point based on wind, landing surface, obstructions, and aircraft limitations.
- AI.VII.O.S5: Position airplane on downwind leg, parallel to landing runway.
- AI.VII.O.S6: Correctly configure the airplane.
- AI.VII.O.S7: As necessary, correlate crosswind with direction of forward slip and transition to side slip before touchdown.
- AI.VII.O.S8: Touch down at a proper pitch attitude, within 200 feet beyond or on the specified point with no side drift and with the airplane’s longitudi
- AI.VII.O.S9: Analyze and correct common errors related to this Task. Members