Instrument Procedures
AA.VI · 10 Tasks · 202 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
AA.VI.A: Instrument Takeoff
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with an instrument takeoff.
23 elements
- AA.VI.A.K1: Operational factors that could affect an instrument takeoff (e.g., runway length, runway lighting, surface conditions, wind, wake turbulence
- AA.VI.A.R1: Selection of a runway based on aircraft performance and limitations, available distance, surface conditions, lighting, and wind.
- AA.VI.A.R2: Wake turbulence.
- AA.VI.A.R3: Abnormal operations, including planning for: Members
- AA.VI.A.R3a: a. Rejected takeoff
- AA.VI.A.R3b: b. Potential engine failure in takeoff/climb phase of flight with the ceiling or visibility below the minimums for an instrument approach at
- AA.VI.A.R4: Collision hazards.
- AA.VI.A.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AA.VI.A.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VI.A.S1: Coordinate with crew, if applicable, and complete the appropriate checklist(s) prior to takeoff in a timely manner.
- AA.VI.A.S2: Properly set the applicable avionics and flight instruments prior to initiating the takeoff.
- AA.VI.A.S3: Make radio calls as appropriate.
- AA.VI.A.S4: Verify assigned/correct runway (ASEL, AMEL) or takeoff path (ASES, AMES).
- AA.VI.A.S5: Position the flight controls for the existing wind, if applicable.
- AA.VI.A.S6: Clear the area, taxi into takeoff position, and align the airplane on the runway centerline (ASEL, AMEL) or takeoff path (ASES, AMES).
- AA.VI.A.S7: Perform an instrument takeoff with instrument meteorological conditions (IMC) simulated at or before reaching an altitude of 100 feet above
- AA.VI.A.S8: Maintain centerline (ASEL, AMEL) and proper flight control inputs during the takeoff roll.
- AA.VI.A.S9: Confirm takeoff power and proper engine and flight instrument indications prior to rotation making callouts, as appropriate, for the airplan
- AA.VI.A.S10: Rotate and lift off at the recommended airspeed, establish the desired pitch attitude, and accelerate to the desired airspeed/V-speed.
- AA.VI.A.S11: Transition smoothly from visual meteorological conditions (VM*C) to actual or simulated instrument meteorological conditions (IMC).
- AA.VI.A.S12: Maintain desired heading ±5° and desired airspeeds ±5 knots.
- AA.VI.A.S13: Comply with air traffic control (ATC) clearances and instructions issued by ATC or the evaluator, as appropriate.
- AA.VI.A.S14: Complete appropriate after takeoff checklist(s) in a timely manner.
AA.VI.B: Departure Procedures
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with instrument departure procedures (DPs).
17 elements
- AA.VI.B.K1: Takeoff minimums; (Obstacle) Departure Procedure (ODP), including Visual Climb over the Airport (VCOA) and Diverse Vector Area (Radar Vector
- AA.VI.B.K2: Use of a Flight Management System (FMS) or Global Positioning System (GPS) to follow a DP.
- AA.VI.B.K3: Pilot/controller responsibilities, communication procedures, and ATC services available to pilots.
- AA.VI.B.K4: Two-way radio communication failure procedures after takeoff.
- AA.VI.B.K5: Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appr
- AA.VI.B.R1: Following published procedures and required climb gradients or ATC Instructions.
- AA.VI.B.R2: Limitations of air traffic avoidance equipment and use of see and avoid techniques.
- AA.VI.B.R3: Automation management.
- AA.VI.B.S1: Select the appropriate instrument departure procedure. Then select, identify (as necessary), and use the appropriate communication and navig
- AA.VI.B.S2: Program the FMS prior to departure and set avionics, including flight director and autopilot controls, as appropriate, for the departure, if
- AA.VI.B.S3: Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
- AA.VI.B.S4: Use current and appropriate navigation publications or databases for the proposed flight.
- AA.VI.B.S5: Establish two-way communications with the proper controlling agency, use proper phraseology, comply, in a timely manner, with all ATC instru
- AA.VI.B.S6: Intercept all courses, radials, and bearings appropriate to the procedure, route, clearance, or as directed by the evaluator in a timely man
- AA.VI.B.S7: Comply with all applicable charted procedures.
- AA.VI.B.S8: Maintain the appropriate airspeed ±10 knots, headings ±10°, and altitude ±100 feet, and accurately track a course, radial, or bearing.
- AA.VI.B.S9: Conduct the departure phase to a point where, in the opinion of the evaluator, the transition to the en route environment is complete.
AA.VI.C: Arrival Procedures
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with Instrument Flight Rules (IFR) arrival procedures.
20 elements
- AA.VI.C.K1: Standard Terminal Arrival (STAR) charts, U.S. Terminal Procedures Publications, and IFR En Route High and Low Altitude Charts.
- AA.VI.C.K2: Use of a Flight Management System (FMS) or GPS to follow a STAR.
- AA.VI.C.K3: Pilot/controller responsibilities, communication procedures, and ATC services available to pilots.
- AA.VI.C.K4: Two-way radio communication failure procedures during an arrival.
- AA.VI.C.K5: Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appr
- AA.VI.C.R1: ATC communications and compliance with published procedures.
- AA.VI.C.R2: Limitations of traffic avoidance equipment.
- AA.VI.C.R3: Responsibility to use "see and avoid" techniques when possible.
- AA.VI.C.R4: Automation management.
- AA.VI.C.R5: ATC instructions that modify an arrival or discontinue/resume the aircraft's lateral or vertical navigation on an arrival.
- AA.VI.C.S1: In actual or simulated instrument conditions, select, identify (as necessary) and use the appropriate communication and navigation facilitie
- AA.VI.C.S2: Set FMS and avionics, including flight director and autopilot controls for the arrival, if applicable.
- AA.VI.C.S3: Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
- AA.VI.C.S4: Use current and appropriate navigation publications or databases for the proposed flight.
- AA.VI.C.S5: Establish two-way communications with the proper controlling agency, use proper phraseology and comply, in a timely manner, with all ATC ins
- AA.VI.C.S6: Intercept all courses, radials, and bearings appropriate to the procedure, route, clearance, or as directed by the evaluator in a timely man
- AA.VI.C.S7: Comply with all applicable charted procedures.
- AA.VI.C.S8: Adhere to airspeed restrictions required by regulation, procedure, aircraft limitation, ATC, or the evaluator.
- AA.VI.C.S9: Establish rates of descent consistent with the route segment, airplane operating characteristics and safety.
- AA.VI.C.S10: Maintain the appropriate airspeed/V-speed ±10 knots, but not less than reference landing approach speed (VREF) if applicable, heading ±10°,
AA.VI.D: Non-precision Approaches
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing non-precision approach procedures.
25 elements
- AA.VI.D.K1: Procedures and limitations associated with a non-precision approach, including the differences between Localizer Performance (LP) and Latera
- AA.VI.D.K2: Navigation system displays and annunciations, modes of operation, and Required Navigation Performance (RNP) lateral accuracy values associat
- AA.VI.D.K3: Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appr
- AA.VI.D.K4: A stabilized approach, including energy management concepts.
- AA.VI.D.R1: Deviating from the assigned approach procedure.
- AA.VI.D.R2: Selecting a navigation frequency.
- AA.VI.D.R3: Management of automated navigation and autoflight systems.
- AA.VI.D.R4: Aircraft configuration during an approach and missed approach.
- AA.VI.D.R5: An unstable approach, including excessive descent rates.
- AA.VI.D.R6: Deteriorating weather conditions on approach.
- AA.VI.D.R7: Operating below the minimum descent altitude (MDA) without proper visual references.
- AA.VI.D.S1: Accomplish the non-precision instrument approaches selected by the evaluator.
- AA.VI.D.S2: Establish two-way communications with air traffic control (ATC) appropriate for the phase of flight or approach segment, and use proper comm
- AA.VI.D.S3: Select, tune, identify, and confirm the operational status of navigation equipment to be used for the approach.
- AA.VI.D.S4: Comply with all clearances issued by ATC or the evaluator.
- AA.VI.D.S5: Recognize if any flight instrumentation is inaccurate or inoperative, and take appropriate action.
- AA.VI.D.S6: Advise ATC or the evaluator if unable to comply with a clearance.
- AA.VI.D.S7: Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
- AA.VI.D.S8: Establish the appropriate airplane configuration and airspeed considering meteorological and operating conditions.
- AA.VI.D.S9: Maintain altitude ±100 feet, selected heading ±5°, airspeed ±10 knots, and accurately track radials, courses, and bearings, prior to beginni
- AA.VI.D.S10: Adjust the published MDA/Derived Decision Altitude (DDA) and visibility criteria for the aircraft approach category, as appropriate, for fac
- AA.VI.D.S11: Establish a stabilized descent to the appropriate altitude.
- AA.VI.D.S12: For the final approach segment, maintain no more than ¼ scale course deviation indicator (CDI) deflection, airspeed ±5 knots of selected val
- AA.VI.D.S13: Execute the missed approach procedure if the required visual references are not distinctly visible and identifiable at the appropriate point
- AA.VI.D.S14: Use a Multi-Function Display (MFD) and other graphical navigation displays, if installed, to monitor position, track wind drift and other pa
AA.VI.E: Precision Approaches
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing precision approach procedures.
25 elements
- AA.VI.E.K1: Procedures and limitations associated with a precision approach, including determining required descent rates and adjusting minimums in the
- AA.VI.E.K2: Navigation system displays, annunciations, and modes of operation.
- AA.VI.E.K3: Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appr
- AA.VI.E.K4: A stabilized approach, including energy management concepts.
- AA.VI.E.R1: Deviating from the assigned approach procedure.
- AA.VI.E.R2: Selecting a navigation frequency.
- AA.VI.E.R3: Management of automated navigation and autoflight systems.
- AA.VI.E.R4: Aircraft configuration during an approach and missed approach.
- AA.VI.E.R5: An unstable approach, including excessive descent rates.
- AA.VI.E.R6: Deteriorating weather conditions on approach.
- AA.VI.E.R7: Continuing to descend below the Decision Altitude (DA)/Decision Height (DH) when the required visual references are not visible.
- AA.VI.E.S1: Accomplish the precision instrument approaches selected by the evaluator.
- AA.VI.E.S2: Establish two-way communications with air traffic control (ATC) appropriate for the phase of flight or approach segment, and use proper comm
- AA.VI.E.S3: Select, tune, identify, and confirm the operational status of navigation equipment to be used for the approach.
- AA.VI.E.S4: Comply in a timely manner with all clearances, instructions, and procedures.
- AA.VI.E.S5: Recognize if any flight instrumentation is inaccurate or inoperative, and take appropriate action.
- AA.VI.E.S6: Advise ATC or the evaluator if unable to comply with a clearance.
- AA.VI.E.S7: Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
- AA.VI.E.S8: Establish the appropriate airplane configuration and airspeed considering meteorological and operating conditions.
- AA.VI.E.S9: Maintain altitude ±100 feet, selected heading ±5°, airspeed ±10 knots, and accurately track radials, courses, and bearings, prior to beginni
- AA.VI.E.S10: Adjust the published DA/DH and visibility criteria for the aircraft approach category, as appropriate, to account for NOTAMS, inoperative ai
- AA.VI.E.S11: Establish a predetermined rate of descent at the point where vertical guidance begins, which approximates that required for the aircraft to
- AA.VI.E.S12: Maintain a stabilized final approach from the Final Approach Fix (FAF) to DA/DH allowing no more than ¼-scale deflection of either the verti
- AA.VI.E.S13: Upon reaching the DA/DH, immediately initiate the missed approach procedures if the required visual references for the runway are not distin
- AA.VI.E.S14: Use an MFD and other graphical navigation displays, if installed, to monitor position, track wind drift and other parameters to maintain des
AA.VI.F: Landing from a Precision Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing the procedures for a landing from a precision approach.
19 elements
- AA.VI.F.K1: Elements related to the pilot’s responsibilities, and the environmental, operational, and meteorological factors that affect landing from a
- AA.VI.F.K2: Approach lighting systems and runway and taxiway signs, markings, and lighting.
- AA.VI.F.R1: Selection of an approach procedure and runway based on aircraft limitations, available distance, surface conditions, and wind.
- AA.VI.F.R2: Wake turbulence.
- AA.VI.F.R4: Collision hazards.
- AA.VI.F.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AA.VI.F.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VI.F.R7: Attempting to land from an unstable approach.
- AA.VI.F.R8: Flying below the glidepath.
- AA.VI.F.R9: Transitioning from instrument to visual references for landing.
- AA.VI.F.R10: Missed Approach.
- AA.VI.F.R11: Land and hold short operations (LAHSO).
- AA.VI.F.S1: Maintain the desired airspeed, ±5 knots, and vertical and lateral guidance within ¼-scale deflection of the indicators during the descent fr
- AA.VI.F.S2: Adhere to all ATC or evaluator advisories, such as NOTAMs, windshear, wake turbulence, runway surface, braking conditions, and other operati
- AA.VI.F.S3: Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
- AA.VI.F.S4: Touch down at the aiming point markings, -250/+500 feet, or where there are no runway aiming point markings, 750 to 1,500 feet, from the app
- AA.VI.F.S5: Maintain positive airplane control throughout the landing using drag and braking devices, as appropriate, to come to a stop.
- AA.VI.F.S6: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
- AA.VI.F.S7: Use runway incursion avoidance procedures, if applicable.
AA.VI.G: Circling Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing a circling approach procedure.
15 elements
- AA.VI.G.K1: Elements related to circling approach procedures and limitations, including approach categories and related airspeed restrictions.
- AA.VI.G.R1: Prescribed circling approach procedures.
- AA.VI.G.R2: Executing a circling approach at night or with marginal visibility.
- AA.VI.G.R3: Losing visual contact with an identifiable part of the airport.
- AA.VI.G.R4: Management of automated navigation and autoflight systems.
- AA.VI.G.R5: Control of altitude, airspeed, and distance while circling.
- AA.VI.G.R6: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AA.VI.G.R7: Executing a missed approach after the MAP while circling.
- AA.VI.G.S1: Comply with the circling approach procedure considering turbulence, windshear, and the maneuvering capability and approach category of the a
- AA.VI.G.S2: Confirm the direction of traffic and adhere to all restrictions and instructions issued by ATC or the evaluator.
- AA.VI.G.S3: Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
- AA.VI.G.S4: Establish the approach and landing configuration. Maintain a stabilized approach and a descent rate that ensures arrival at the MDA, or the
- AA.VI.G.S5: Maintain airspeed ±5 knots, desired heading/track ±5°, and altitude +100/-0 feet until descending below the MDA or the preselected circling
- AA.VI.G.S6: Visually maneuver to a base or downwind leg appropriate for the landing runway and environmental conditions.
- AA.VI.G.S7: If a missed approach occurs, turn in the appropriate direction using the correct procedure and appropriately configure the airplane.
AA.VI.H: Landing from a Circling Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing the procedures for a landing from a circling approach.
21 elements
- AA.VI.H.K1: Elements related to the pilot’s responsibilities, and the environmental, operational, and meteorological factors that affect landing from a
- AA.VI.H.K2: Approach lighting systems and runway and taxiway signs, markings, and lighting.
- AA.VI.H.R1: Selection of an approach procedure and runway based on aircraft limitations, available distance, surface conditions, and wind.
- AA.VI.H.R2: Wake turbulence.
- AA.VI.H.R4: Collision hazards.
- AA.VI.H.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AA.VI.H.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VI.H.R7: Attempting to land from an unstable approach.
- AA.VI.H.R8: Missed Approach.
- AA.VI.H.R9: Land and hold short operations (LAHSO).
- AA.VI.H.S1: Keep the airport environment in sight and remain within the circling approach radius applicable to the approach category to a position from
- AA.VI.H.S2: Adhere to all ATC or evaluator advisories, such as NOTAMs, windshear, wake turbulence, runway surface, braking conditions, and other operati
- AA.VI.H.S3: Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
- AA.VI.H.S4: Aligns the airplane for a normal landing on the selected runway without excessive maneuvering and without exceeding the normal operating lim
- AA.VI.H.S5: Make smooth, timely, and correct control application throughout the circling maneuver and maintain appropriate airspeed, ±5 knots. If applic
- AA.VI.H.S6: Ensure the airplane is configured for landing.
- AA.VI.H.S7: Scan the landing runway and adjoining area for traffic and obstructions. (ASEL, AMEL).
- AA.VI.H.S8: Touch down at the aiming point markings - 250/+500 feet, or where there are no runway aiming point markings 750 to 1,500 feet from the appro
- AA.VI.H.S9: Maintain positive aircraft control throughout the landing using drag and braking devices, as appropriate, to come to a stop.
- AA.VI.H.S10: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
- AA.VI.H.S11: Use runway incursion avoidance procedures, if applicable.
AA.VI.I: Missed Approaches
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing a missed approach procedure.
18 elements
- AA.VI.I.K1: Elements related to missed approach procedures, including reference to standby or backup instruments.
- AA.VI.I.K2: Limitations associated with standard instrument approaches, including while using an FMS or autopilot, if equipped.
- AA.VI.I.R1: Deviations from prescribed procedures or ATC instructions.
- AA.VI.I.R2: Holding, diverting, or electing to fly the approach again.
- AA.VI.I.R3: Aircraft configuration during an approach and missed approach.
- AA.VI.I.R4: Factors that might lead to executing a missed approach procedure before the MAP or to a go-around below DA, DH, or MDA, as applicable.
- AA.VI.I.R5: Management of automated navigation and autoflight systems.
- AA.VI.I.S1: Promptly initiate the missed approach procedure and report it to ATC.
- AA.VI.I.S2: Apply the appropriate power setting for the flight condition and establish a pitch attitude necessary to obtain the desired performance.
- AA.VI.I.S3: Retract the wing flaps/drag devices and landing gear, if appropriate, in the correct sequence and at a safe altitude, and establish a positi
- AA.VI.I.S4: Coordinate with crew, if applicable, and complete the appropriate procedures and checklist(s) in a timely manner.
- AA.VI.I.S5: Comply with the published or alternate missed approach procedure.
- AA.VI.I.S6: Advise ATC or the evaluator if unable to comply with a clearance, restriction, or climb gradient.
- AA.VI.I.S7: Maintain the heading, course, or bearing ±5°, and altitude(s) ±100 feet during the missed approach procedure.
- AA.VI.I.S8: Use an MFD and other graphical navigation displays, if installed, to monitor position and track to help navigate the missed approach.
- AA.VI.I.S9: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
- AA.VI.I.S10: Re-engage autopilot (if installed) at appropriate times during the missed approach procedure.
- AA.VI.I.S11: Request ATC clearance to attempt another approach, proceed to the alternate airport, holding fix, or other clearance limit, as appropriate,
AA.VI.J: Holding Procedures
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with holding procedures.
19 elements
- AA.VI.J.K1: Elements related to holding procedures, including reporting criteria, appropriate speeds, and recommended entry procedures for standard, non
- AA.VI.J.K2: Determining holding endurance based upon factors, including an expect further clearance (EFC) time, fuel on board, fuel flow while holding,
- AA.VI.J.K3: When to declare minimum fuel or a fuel-related emergency.
- AA.VI.J.K4: Use of automation for holding, including autopilot and flight management systems, if equipped.
- AA.VI.J.R1: Recalculating fuel reserves if assigned an unanticipated expect further clearance (EFC) time.
- AA.VI.J.R2: Scenarios and circumstances that could result in minimum fuel or the need to declare an emergency.
- AA.VI.J.R3: Scenarios that could lead to holding, including deteriorating weather at the planned destination.
- AA.VI.J.R4: Holding entry and wind correction while holding.
- AA.VI.J.R5: Holding while in icing conditions.
- AA.VI.J.R6: Automation management.
- AA.VI.J.S1: Correctly identify instrument navigation aids associated with the assigned hold.
- AA.VI.J.S2: Use an entry procedure appropriate for a standard, nonstandard, published, or non-published holding pattern.
- AA.VI.J.S3: Change to the appropriate holding airspeed for the aircraft and holding altitude to cross the holding fix at or below maximum holding airspe
- AA.VI.J.S4: Comply with the holding pattern leg length and other restrictions, if applicable, associated with the holding pattern.
- AA.VI.J.S5: Comply with ATC reporting requirements.
- AA.VI.J.S6: Use proper wind correction procedures to maintain the desired pattern and to arrive over the fix as close as possible to a specified time.
- AA.VI.J.S7: Maintain specified airspeed ±10 knots, altitude ±100 feet, headings ±10°, and accurately track a selected course, radial, or bearing.
- AA.VI.J.S8: If available, use automation, including autopilot, flight director controls, and navigation displays associated with the assigned hold.
- AA.VI.J.S9: Update fuel reserve calculations based on EFC times.