Slow flight, Stalls, and Spins
AI.X · 9 Tasks · 212 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
AI.X.A: Maneuvering During Slow Flight
15 elements
- AI.X.A.K1: Purpose of and procedures for proper slow flight.
- AI.X.A.K2: Aerodynamics associated with slow flight in various airplane configurations, including the relationship between angle of attack, airspeed, l
- AI.X.A.K3: Common errors related to this Task.
- AI.X.A.R1: Inadvertent slow flight and flight with a stall warning, which could lead to loss of control.
- AI.X.A.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- AI.X.A.R3: Uncoordinated flight.
- AI.X.A.R4: Effect of environmental elements on airplane performance (e.g., turbulence, microbursts, and high-density altitude).
- AI.X.A.R5: Collision hazards.
- AI.X.A.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.X.A.S1: Clear the area.
- AI.X.A.S2: Select an entry altitude that allows the Task to be completed no lower than 1,500 feet above ground level (AGL) (ASEL, ASES) or 3,000 feet A
- AI.X.A.S3: Establish and maintain an airspeed at which any further increase in angle of attack, increase in load factor, or reduction in power, would r
- AI.X.A.S4: Accomplish coordinated straight-and-level flight, turns, climbs, and descents with the aircraft configured as specified by the evaluator wit
- AI.X.A.S5: Maintain the specified altitude, ±50 feet; specified heading, ±10°; airspeed, +5/-0 knots; and specified angle of bank, ±5°.
- AI.X.A.S6: Analyze and correct common errors related to this Task.
AI.X.B: Demonstration of Flight Characteristics at Various Configurations and Airspeeds (ASEL and ASES)
42 elements
- AI.X.B.K1: Purpose of and procedures for demonstration of flight characteristics at various configurations and airspeeds.
- AI.X.B.K2: Power required at various airspeeds between cruise airspeed and critically slow airspeeds near the critical angle of attack.
- AI.X.B.K3: The minimum power required speed and its role in differentiating the region of normal command and the region of reversed command on the powe
- AI.X.B.K4: The relationships between lift, drag, angle of attack, airspeed, load factor, power required, weight, center of gravity, attitude, yaw effec
- AI.X.B.K5: Pitch, power, and trim control inputs that are required to operate the airplane in level flight, turns, climbs, and descents and how the con
- AI.X.B.K6: Flight characteristics and aerodynamics associated with configuration changes applicable to the specific to the make and model of airplane p
- AI.X.B.K7: Airspeeds specific to the airplane for various operations, how to identify them on the airspeed indicator (if applicable), and their signifi Members
- AI.X.B.K7a: a. Design/operating maneuvering speed
- AI.X.B.K7b: b. Landing gear extended/operating speed, if applicable
- AI.X.B.K7c: c. Flaps extended/operating speed, if applicable
- AI.X.B.K7d: d. Best glide speed
- AI.X.B.K7e: e. Reference landing speed
- AI.X.B.K7f: f. Stalling speeds
- AI.X.B.K8: Common errors related to this Task.
- AI.X.B.R1: Lack of familiarity with airplane airspeed limitations and interpretation of the airspeed indicator.
- AI.X.B.R2: Exceeding airspeed limitations.
- AI.X.B.R3: Flight characteristics in the region of reversed command and the potential for loss of control.
- AI.X.B.R4: Inadvertent exceedance of the critical angle of attack.
- AI.X.B.R5: Range, limitations, and operational characteristics of airspeed indicators and stall warning indicators (e.g., airplane buffet, stall horn,
- AI.X.B.R6: Unacknowledged stall warning indications.
- AI.X.B.R7: Effects of environmental elements on airplane performance and controllability. (e.g., turbulence, microbursts, and high density altitude).
- AI.X.B.R8: Collision hazards.
- AI.X.B.R9: Maneuvering at critically slow airspeeds.
- AI.X.B.S1: Conduct and explain the procedure, manage the associated risk, and fly the airplane, while maintaining altitude ±100 feet, airspeed +5/-0 kn
- AI.X.B.S2: Select an altitude that allows the maneuver to be performed no lower than 1,500 feet above ground level (AGL).
- AI.X.B.S3: Clear the area.
- AI.X.B.S4: Clean configuration demonstration: Members
- AI.X.B.S4a: a. Establish and maintain design/operating maneuvering speed appropriate to the airplane’s weight while describing pitch, power, and trim in
- AI.X.B.S4b: b. With gear and flaps retracted (as applicable), slow the airplane to, and maintain, best glide speed (or as specified by evaluator), notin
- AI.X.B.S4c: c. Continue to slow the airplane to, and maintain, an airspeed at which any further increase in angle of attack, increase in load factor, or
- AI.X.B.S4d: d. Verbally acknowledging stall warning indications, then;
- AI.X.B.S4e: e. Without changing power setting, lower the pitch attitude and accelerate to a faster airspeed until reestablishing the airplane in level f
- AI.X.B.S4f: f. Return to normal cruise flight at the altitude and heading specified by the evaluator
- AI.X.B.S5: Landing configuration demonstration. Members
- AI.X.B.S5a: a. Establish and maintain design/operating maneuvering speed appropriate to the airplane’s weight while describing pitch, power, and trim in
- AI.X.B.S5b: b. Slow the airplane to, and maintain, the appropriate limiting airspeeds and fully extend the landing gear and flaps (as appropriate), then
- AI.X.B.S5c: c. With gear and flaps fully extended (as applicable), slow the airplane to, and maintain, reference landing speed (or as specified by the e
- AI.X.B.S5d: d. With gear and flaps fully extended, continue to slow the airplane to, and maintain, an airspeed at which any further increase in angle of
- AI.X.B.S5e: e. Verbally acknowledging stall warning indications, then;
- AI.X.B.S5f: f. Without changing power setting, lower the pitch attitude and accelerate to a faster airspeed until reestablishing the airplane in in leve
- AI.X.B.S5g: g. Return to normal cruise flight at the altitude and heading specified by the evaluator
- AI.X.B.S6: Analyze and correct common errors related to this Task.
AI.X.C: Power-Off Stalls
25 elements
- AI.X.C.K1: Purpose of and procedures for power-off stalls.
- AI.X.C.K2: Aerodynamics associated with stalls in various airplane configurations, including the relationship between angle of attack, airspeed, load f
- AI.X.C.K3: Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or f
- AI.X.C.K4: Factors and situations that can lead to a power-off stall and actions that can be taken to prevent it.
- AI.X.C.K5: Fundamentals of stall recovery.
- AI.X.C.K6: Common errors related to this Task.
- AI.X.C.R1: Factors and situations that could lead to an inadvertent power-off stall, spin, and loss of control.
- AI.X.C.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- AI.X.C.R3: Stall warning(s) during normal operations.
- AI.X.C.R4: Stall recovery procedure.
- AI.X.C.R5: Secondary stalls, accelerated stalls, and cross-control stalls.
- AI.X.C.R6: Effect of environmental elements on airplane performance related to power-off stalls (e.g., turbulence, microbursts, and high-density altitu
- AI.X.C.R7: Collision hazards.
- AI.X.C.R8: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.X.C.S1: Clear the area.
- AI.X.C.S2: Select an entry altitude that allows the Task to be completed no lower than 1,500 feet above ground level (AGL) (ASEL, ASES) or 3,000 feet A
- AI.X.C.S3: Configure the airplane in the approach or landing configuration, as specified by the evaluator, and maintain coordinated flight throughout t
- AI.X.C.S4: Establish a stabilized descent.
- AI.X.C.S5: Transition smoothly from the approach or landing attitude to a pitch attitude that induces a stall.
- AI.X.C.S6: Maintain a specified heading, ±10° if in straight flight; maintain a specified angle of bank not to exceed 20°, ±5° if in turning flight, un
- AI.X.C.S7: Acknowledge the cues at the first indication of a stall (e.g., aircraft buffet, stall horn, etc.).
- AI.X.C.S8: Recover at the first indication of a stall or after a full stall has occurred, as specified by the evaluator.
- AI.X.C.S9: Configure the airplane as recommended by the manufacturer, and accelerate to best angle of climb speed (VX) or best rate of climb speed (VY)
- AI.X.C.S10: Return to the altitude, heading, and airspeed specified by the evaluator.
- AI.X.C.S11: Analyze and correct common errors related to this Task.
AI.X.D: Power-On Stalls
25 elements
- AI.X.D.K1: Purpose of and procedures for power-on stalls.
- AI.X.D.K2: Aerodynamics associated with stalls in various airplane configurations, including the relationship between angle of attack, airspeed, load f
- AI.X.D.K3: Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or f
- AI.X.D.K4: Factors and situations that can lead to a power-on stall and actions that can be taken to prevent it.
- AI.X.D.K5: Fundamentals of stall recovery.
- AI.X.D.K6: Common errors related to this Task.
- AI.X.D.R1: Factors and situations that could lead to an inadvertent power-on stall, spin, and loss of control.
- AI.X.D.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- AI.X.D.R3: Stall warning(s) during normal operations.
- AI.X.D.R4: Stall recovery procedure.
- AI.X.D.R5: Secondary stalls, accelerated stalls, elevator trim stalls, and cross-control stalls.
- AI.X.D.R6: Effect of environmental elements on airplane performance related to power-on stalls (e.g., turbulence, microbursts, and high-density altitud
- AI.X.D.R7: Collision hazards.
- AI.X.D.R8: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.X.D.S1: Clear the area.
- AI.X.D.S2: Select an entry altitude that allows the Task to be completed no lower than 1,500 feet above ground level (AGL) (ASEL, ASES) or 3,000 feet A
- AI.X.D.S3: Establish the takeoff, departure, or cruise configuration, as specified by the evaluator, and maintain coordinated flight throughout the man
- AI.X.D.S4: Set power to no less than 65 percent power.
- AI.X.D.S5: Transition smoothly from the takeoff or departure attitude to the pitch attitude that induces a stall.
- AI.X.D.S6: Maintain a specified heading ±10° if in straight flight; maintain a specified angle of bank not to exceed 20°, ±10° if in turning flight, un
- AI.X.D.S7: Acknowledge the cues at the first indication of a stall (e.g., aircraft buffet, stall horn, etc.).
- AI.X.D.S8: Recover at the first indication of a stall or after a full stall has occurred, as specified by the evaluator.
- AI.X.D.S9: Configure the airplane as recommended by the manufacturer, and accelerate to best angle of climb speed (VX) or best rate of climb speed (VY)
- AI.X.D.S10: Return to the altitude, heading, and airspeed specified by the evaluator.
- AI.X.D.S11: Analyze and correct common errors related to this Task.
AI.X.E: Accelerated Stalls
24 elements
- AI.X.E.K1: Purpose of and procedures for accelerated stalls.
- AI.X.E.K2: Aerodynamics associated with accelerated stalls in various airplane configurations, including the relationship between angle of attack, airs
- AI.X.E.K3: Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or f
- AI.X.E.K4: Factors leading to an accelerated stall and preventive actions.
- AI.X.E.K5: Fundamentals of stall recovery.
- AI.X.E.K6: Common errors related to this Task.
- AI.X.E.R1: Factors and situations that could lead to an inadvertent accelerated stall, spin, and loss of control.
- AI.X.E.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- AI.X.E.R3: Stall warning(s) during normal operations.
- AI.X.E.R4: Stall recovery procedure.
- AI.X.E.R5: Secondary stalls, cross-control stalls, and spins.
- AI.X.E.R6: Effect of environmental elements on airplane performance related to accelerated stalls (e.g., turbulence, microbursts, and high-density alti
- AI.X.E.R7: Collision hazards.
- AI.X.E.R8: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.X.E.S1: Clear the area.
- AI.X.E.S2: Select an entry altitude that allows the Task to be completed no lower than 3,000 feet above ground level (AGL).
- AI.X.E.S3: Establish the configuration as specified by the evaluator.
- AI.X.E.S4: Set power appropriate for the configuration, such that the airspeed does not exceed the maneuvering speed (VA) or any other applicable Pilot
- AI.X.E.S5: Establish and maintain a coordinated turn in a 45° bank, increasing elevator back pressure smoothly and firmly until an impending stall is r
- AI.X.E.S6: Acknowledge the cues at the first indication of a stall (e.g., aircraft buffet, stall horn, etc.).
- AI.X.E.S7: Execute a stall recovery in accordance with procedures set forth in the Pilot's Operating Handbook (POH)/Flight Manual (FM).
- AI.X.E.S8: Configure the airplane as recommended by the manufacturer, and accelerate to best angle of climb speed (VX) or best rate of climb speed (VY)
- AI.X.E.S9: Return to the altitude, heading, and airspeed specified by the evaluator.
- AI.X.E.S10: Analyze and correct common errors related to this Task.
AI.X.F: Cross-Controlled Stall Demonstration (ASEL, ASES)
20 elements
- AI.X.F.K1: Aerodynamics of cross-controlled stalls.
- AI.X.F.K2: Flight situations where unintentional cross-controlled stalls may occur.
- AI.X.F.K3: Recognition of cross-controlled stalls.
- AI.X.F.K4: Entry procedure and minimum entry altitude.
- AI.X.F.K5: Recovery procedure.
- AI.X.F.K6: Common errors related to this Task.
- AI.X.F.R1: Stall recovery procedure.
- AI.X.F.R2: Effect of environmental elements on airplane performance related to cross-controlled stalls (e.g., turbulence, microbursts, and high-density
- AI.X.F.R3: Collision hazards.
- AI.X.F.R4: Aircraft limitations.
- AI.X.F.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.X.F.S1: Clear the area.
- AI.X.F.S2: Select an entry altitude that allows the Task to be completed no lower than 3,000 feet above ground level (AGL).
- AI.X.F.S3: Configure the airplane (with gear down) and close the throttle.
- AI.X.F.S4: Establish a normal glide airspeed and trim the airplane.
- AI.X.F.S5: Roll into a medium-banked turn, apply excess rudder in the turn while holding bank constant with opposite aileron input, and add elevator pr
- AI.X.F.S6: Acknowledge the cues at the first indication of a stall (e.g., aircraft buffet, stall horn, etc.).
- AI.X.F.S7: Recover at the first indication of a stall or after a full stall has occurred, as specified by the evaluator.
- AI.X.F.S8: Describe and demonstrate conditions that lead to a cross-controlled stall for future avoidance.
- AI.X.F.S9: Analyze and correct common errors related to this Task.
AI.X.G: Elevator Trim Stall Demonstration (ASEL, ASES)
21 elements
- AI.X.G.K1: Aerodynamics of elevator trim stalls.
- AI.X.G.K2: Flight situations where elevator trim stalls could occur.
- AI.X.G.K3: Recognition of elevator trim stalls.
- AI.X.G.K4: Entry procedure and minimum entry altitude.
- AI.X.G.K5: Recovery procedure.
- AI.X.G.K6: Common errors related to this Task.
- AI.X.G.R1: Stall recovery procedure.
- AI.X.G.R2: Effect of environmental elements on airplane performance related to cross-controlled stalls (e.g., turbulence, microbursts, and high-density
- AI.X.G.R3: Collision hazards.
- AI.X.G.R4: Aircraft limitations.
- AI.X.G.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.X.G.S1: Clear the area.
- AI.X.G.S2: Select an entry altitude that allows the Task to be completed no lower than 3,000 feet above ground level (AGL).
- AI.X.G.S3: Retard the throttle and configure the airplane for landing.
- AI.X.G.S4: Establish a normal glide airspeed and trim the airplane.
- AI.X.G.S5: Advance the throttle to the maximum allowable power as in a go-around.
- AI.X.G.S6: Acknowledge the cues at the first indication of a stall (e.g., aircraft buffet, stall horn, etc.).
- AI.X.G.S7: Recover at the first indication of a stall or after a full stall has occurred, as specified by the evaluator.
- AI.X.G.S8: Adjust trim and return to the desired flightpath.
- AI.X.G.S9: Describe and demonstrate conditions that lead to an elevator trim stall for future avoidance.
- AI.X.G.S10: Analyze and correct common errors related to this Task.
AI.X.H: Secondary Stall Demonstration (ASEL, ASES)
17 elements
- AI.X.H.K1: Aerodynamics of secondary stalls.
- AI.X.H.K2: Flight situations where secondary stalls may occur.
- AI.X.H.K3: Recognition of a secondary stall.
- AI.X.H.K4: Entry procedure and minimum entry altitude.
- AI.X.H.K5: Recovery procedure.
- AI.X.H.K6: Common errors related to this Task.
- AI.X.H.R1: Stall recovery procedure.
- AI.X.H.R2: Effect of environmental elements on airplane performance related to cross-controlled stalls (e.g., turbulence, microbursts, and high-density
- AI.X.H.R3: Collision hazards.
- AI.X.H.R4: Aircraft limitations.
- AI.X.H.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.X.H.S1: Clear the area.
- AI.X.H.S2: Select an entry altitude that allows the Task to be completed no lower than 3,000 feet above ground level (AGL).
- AI.X.H.S3: Enter a stall in a specified configuration and exceed the critical angle of attach a second time during the recovery.
- AI.X.H.S4: Recover promptly and appropriately after a secondary stall occurs.
- AI.X.H.S5: Describe and demonstrate conditions that lead to a secondary stall for future avoidance.
- AI.X.H.S6: Analyze and correct common errors related to this Task.
AI.X.I: Spin Awareness and Spins
23 elements
- AI.X.I.K1: Purpose of and procedures for spin awareness and spins.
- AI.X.I.K2: Aerodynamics associated with spins in various airplane configurations, including the relationship between angle of attack, airspeed, load fa
- AI.X.I.K3: What causes a spin and how to identify the entry, incipient, and developed phases of a spin.
- AI.X.I.K4: Spin recovery procedure.
- AI.X.I.K5: Human factors associated with spin instruction.
- AI.X.I.K6: How to determine if an airplane approved for the spin maneuver based on airworthiness category and type certificate.
- AI.X.I.K7: Flight situations where unintentional spins may occur.
- AI.X.I.K8: Entry procedure and minimum entry altitude for intentional spins.
- AI.X.I.K9: Control procedure to maintain a stabilized spin.
- AI.X.I.K10: Recognize conditions that lead to a spin for future avoidance.
- AI.X.I.K11: Orientation during a spin, including which instrument(s) are reliable for determining the directions of spin.
- AI.X.I.K12: Recovery procedure and minimum recovery altitude for intentional spins.
- AI.X.I.K13: Common errors related to this Task.
- AI.X.I.R1: Factors and situations that could lead to inadvertent spin and loss of control.
- AI.X.I.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- AI.X.I.R3: Spin recovery procedure.
- AI.X.I.R4: Effect of environmental elements on airplane performance related to spins (e.g., turbulence, microbursts, and high-density altitude).
- AI.X.I.R5: Collision hazards.
- AI.X.I.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.X.I.S1: Clear the area.
- AI.X.I.S2: Select an entry altitude that allows the Task to be completed no lower than 4,000 feet AGL.
- AI.X.I.S3: Enter and recover from an intentional spin if requested by the evaluator.
- AI.X.I.S4: Analyze and correct common errors related to this Task.