Slow Flight and Stalls
CA.VII · 5 Tasks · 86 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
CA.VII.A: Maneuvering During Slow Flight
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with maneuvering during slow flight in cruise configuration.
12 elements
- CA.VII.A.K1: Aerodynamics associated with slow flight in various airplane configurations, including the relationship between angle of attack, airspeed, l
- CA.VII.A.R1: Inadvertent slow flight and flight with a stall warning, which could lead to loss of control.
- CA.VII.A.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- CA.VII.A.R3: Uncoordinated flight.
- CA.VII.A.R4: Effect of environmental elements on airplane performance (e.g., turbulence, microbursts, and high-density altitude).
- CA.VII.A.R5: Collision hazards.
- CA.VII.A.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- CA.VII.A.S1: Clear the area.
- CA.VII.A.S2: Select an entry altitude that allows the Task to be completed no lower than 1,500 feet above ground level (AGL) (ASEL, ASES) or 3,000 feet A
- CA.VII.A.S3: Establish and maintain an airspeed at which any further increase in angle of attack, increase in load factor, or reduction in power, would r
- CA.VII.A.S4: Accomplish coordinated straight-and-level flight, turns, climbs, and descents with the aircraft configured as specified by the evaluator wit
- CA.VII.A.S5: Maintain the specified altitude, ±50 feet; specified heading, ±10°; airspeed, +5/-0 knots; and specified angle of bank, ±5°.
CA.VII.B: Power-Off Stalls
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with power-off stalls.
22 elements
- CA.VII.B.K1: Aerodynamics associated with stalls in various airplane configurations, including the relationship between angle of attack, airspeed, load f
- CA.VII.B.K2: Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or f
- CA.VII.B.K3: Factors and situations that can lead to a power-off stall and actions that can be taken to prevent it.
- CA.VII.B.K4: Fundamentals of stall recovery.
- CA.VII.B.R1: Factors and situations that could lead to an inadvertent power-off stall, spin, and loss of control.
- CA.VII.B.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- CA.VII.B.R3: Stall warning(s) during normal operations.
- CA.VII.B.R4: Stall recovery procedure.
- CA.VII.B.R5: Secondary stalls, accelerated stalls, and cross-control stalls.
- CA.VII.B.R6: Effect of environmental elements on airplane performance related to power-off stalls (e.g., turbulence, microbursts, and high-density altitu
- CA.VII.B.R7: Collision hazards.
- CA.VII.B.R8: Distractions, task prioritization, loss of situational awareness, or disorientation.
- CA.VII.B.S1: Clear the area.
- CA.VII.B.S2: Select an entry altitude that allows the Task to be completed no lower than 1,500 feet above ground level (AGL) (ASEL, ASES) or 3,000 feet A
- CA.VII.B.S3: Configure the airplane in the approach or landing configuration, as specified by the evaluator, and maintain coordinated flight throughout t
- CA.VII.B.S4: Establish a stabilized descent.
- CA.VII.B.S5: Transition smoothly from the approach or landing attitude to a pitch attitude that induces a stall.
- CA.VII.B.S6: Maintain a specified heading, ±10° if in straight flight; maintain a specified angle of bank not to exceed 20°, ±5° if in turning flight, un
- CA.VII.B.S7: Acknowledge the cues at the first indication of a stall (e.g., aircraft buffet, stall horn, etc.).
- CA.VII.B.S8: Recover at the first indication of a stall or after a full stall has occurred, as specified by the evaluator.
- CA.VII.B.S9: Configure the airplane as recommended by the manufacturer, and accelerate to best angle of climb speed (VX) or best rate of climb speed (VY)
- CA.VII.B.S10: Return to the altitude, heading, and airspeed specified by the evaluator.
CA.VII.C: Power-On Stalls
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with power-on stalls.
22 elements
- CA.VII.C.K1: Aerodynamics associated with stalls in various airplane configurations, including the relationship between angle of attack, airspeed, load f
- CA.VII.C.K2: Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or f
- CA.VII.C.K3: Factors and situations that can lead to a power-on stall and actions that can be taken to prevent it.
- CA.VII.C.K4: Fundamentals of stall recovery.
- CA.VII.C.R1: Factors and situations that could lead to an inadvertent power-on stall, spin, and loss of control.
- CA.VII.C.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- CA.VII.C.R3: Stall warning(s) during normal operations.
- CA.VII.C.R4: Stall recovery procedure.
- CA.VII.C.R5: Secondary stalls, accelerated stalls, elevator trim stalls, and cross-control stalls.
- CA.VII.C.R6: Effect of environmental elements on airplane performance related to power-on stalls (e.g., turbulence, microbursts, and high-density altitud
- CA.VII.C.R7: Collision hazards.
- CA.VII.C.R8: Distractions, task prioritization, loss of situational awareness, or disorientation.
- CA.VII.C.S1: Clear the area.
- CA.VII.C.S2: Select an entry altitude that allows the Task to be completed no lower than 1,500 feet above ground level (AGL) (ASEL, ASES) or 3,000 feet A
- CA.VII.C.S3: Establish the takeoff, departure, or cruise configuration, as specified by the evaluator, and maintain coordinated flight throughout the man
- CA.VII.C.S4: Set power to no less than 65 percent power.
- CA.VII.C.S5: Transition smoothly from the takeoff or departure attitude to the pitch attitude that induces a stall.
- CA.VII.C.S6: Maintain a specified heading ±10° if in straight flight; maintain a specified angle of bank not to exceed 20°, ±10° if in turning flight, un
- CA.VII.C.S7: Acknowledge the cues at the first indication of a stall (e.g., aircraft buffet, stall horn, etc.).
- CA.VII.C.S8: Recover at the first indication of a stall or after a full stall has occurred, as specified by the evaluator.
- CA.VII.C.S9: Configure the airplane as recommended by the manufacturer, and accelerate to best angle of climb speed (VX) or best rate of climb speed (VY)
- CA.VII.C.S10: Return to the altitude, heading, and airspeed specified by the evaluator.
CA.VII.D: Accelerated Stalls
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with accelerated stalls (power-on or power-off).
21 elements
- CA.VII.D.K1: Aerodynamics associated with accelerated stalls in various airplane configurations, including the relationship between angle of attack, airs
- CA.VII.D.K2: Stall characteristics as they relate to airplane design, and recognition impending stall and full stall indications using sight, sound, or f
- CA.VII.D.K3: Factors leading to an accelerated stall and preventive actions.
- CA.VII.D.K4: Fundamentals of stall recovery.
- CA.VII.D.R1: Factors and situations that could lead to an inadvertent accelerated stall, spin, and loss of control.
- CA.VII.D.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- CA.VII.D.R3: Stall warning(s) during normal operations.
- CA.VII.D.R4: Stall recovery procedure.
- CA.VII.D.R5: Secondary stalls, cross-control stalls, and spins.
- CA.VII.D.R6: Effect of environmental elements on airplane performance related to accelerated stalls (e.g., turbulence, microbursts, and high-density alti
- CA.VII.D.R7: Collision hazards.
- CA.VII.D.R8: Distractions, task prioritization, loss of situational awareness, or disorientation.
- CA.VII.D.S1: Clear the area.
- CA.VII.D.S2: Select an entry altitude that allows the Task to be completed no lower than 3,000 feet above ground level (AGL).
- CA.VII.D.S3: Establish the configuration as specified by the evaluator.
- CA.VII.D.S4: Set power appropriate for the configuration, such that the airspeed does not exceed the maneuvering speed (VA) or any other applicable Pilot
- CA.VII.D.S5: Establish and maintain a coordinated turn in a 45° bank, increasing elevator back pressure smoothly and firmly until an impending stall is r
- CA.VII.D.S6: Acknowledge the cues at the first indication of a stall (e.g., aircraft buffet, stall horn, etc.).
- CA.VII.D.S7: Execute a stall recovery in accordance with procedures set forth in the Pilot's Operating Handbook (POH)/Flight Manual (FM).
- CA.VII.D.S8: Configure the airplane as recommended by the manufacturer, and accelerate to best angle of climb speed (VX) or best rate of climb speed (VY)
- CA.VII.D.S9: Return to the altitude, heading, and airspeed specified by the evaluator.
CA.VII.E: Spin Awareness
To determine the applicant exhibits satisfactory knowledge of the causes and procedures for recovery from unintentional spins and understands the risk associated with unintentional spins.
9 elements
- CA.VII.E.K1: Aerodynamics associated with spins in various airplane configurations, including the relationship between angle of attack, airspeed, load fa
- CA.VII.E.K2: What causes a spin and how to identify the entry, incipient, and developed phases of a spin.
- CA.VII.E.K3: Spin recovery procedure.
- CA.VII.E.R1: Factors and situations that could lead to inadvertent spin and loss of control.
- CA.VII.E.R2: Range and limitations of stall warning indicators (e.g., aircraft buffet, stall horn, etc.).
- CA.VII.E.R3: Spin recovery procedure.
- CA.VII.E.R4: Effect of environmental elements on airplane performance related to spins (e.g., turbulence, microbursts, and high-density altitude).
- CA.VII.E.R5: Collision hazards.
- CA.VII.E.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.