Instrument Approach Procedures
IR.VI · 5 Tasks · 98 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
IR.VI.A: Non-precision Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing non-precision approach procedures solely by reference to instruments.
26 elements
- IR.VI.A.K1: Procedures and limitations associated with a non-precision approach, including the differences between Localizer Performance (LP) and Latera
- IR.VI.A.K2: Navigation system indications and annunciations expected during an area navigation (RNAV) approach.
- IR.VI.A.K3: Ground-based and satellite-based navigation systems used for a non-precision approach.
- IR.VI.A.K4: A stabilized approach, including energy management concepts.
- IR.VI.A.R1: Deviating from the assigned approach procedure.
- IR.VI.A.R2: Selecting a navigation frequency.
- IR.VI.A.R3: Management of automated navigation and autoflight systems.
- IR.VI.A.R4: Aircraft configuration during an approach and missed approach.
- IR.VI.A.R5: An unstable approach, including excessive descent rates.
- IR.VI.A.R6: Deteriorating weather conditions on approach.
- IR.VI.A.R7: Operating below the minimum descent altitude (MDA) without proper visual references.
- IR.VI.A.S1: Accomplish the non-precision instrument approaches selected by the evaluator.
- IR.VI.A.S2: Establish two-way communications with air traffic control (ATC) appropriate for the phase of flight or approach segment, and use proper comm
- IR.VI.A.S3: Select, tune, identify, and confirm the operational status of navigation equipment to be used for the approach.
- IR.VI.A.S4: Comply with all clearances issued by ATC or the evaluator.
- IR.VI.A.S5: Recognize if any flight instrumentation is inaccurate or inoperative, and take appropriate action.
- IR.VI.A.S6: Advise ATC or the evaluator if unable to comply with a clearance.
- IR.VI.A.S7: Complete the appropriate checklist(s).
- IR.VI.A.S8: Establish the appropriate aircraft configuration and airspeed considering meteorological and operating conditions.
- IR.VI.A.S9: Maintain altitude ±100 feet, selected heading ±10°, airspeed ±10 knots, no more than ¾ scale CDI deflection, and accurately track radials, c
- IR.VI.A.S10: Adjust the published MDA and visibility criteria for the aircraft approach category, as appropriate, for factors that include Notices of Air
- IR.VI.A.S11: Establish a stabilized descent to the appropriate altitude.
- IR.VI.A.S12: For the final approach segment, maintain no more than ¾ scale CDI deflection, airspeed ±10 knots, and altitude, if applicable, above MDA +10
- IR.VI.A.S13: Assess if the required visual references are available, and either initiate the missed approach procedure or continue for landing.
- IR.VI.A.S14: Use a multi-function display (MFD) and other graphical navigation displays, if installed, to monitor position, track wind drift, and to main
- IR.VI.A.S15: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IR.VI.B: Precision Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing precision approach procedures solely by reference to instruments.
28 elements
- IR.VI.B.K1: Procedures and limitations associated with a precision approach, including determining required descent rates and adjusting minimums in the
- IR.VI.B.K2: Navigation system displays, annunciations, and modes of operation.
- IR.VI.B.K3: Ground-based and satellite-based navigation systems (orientation, course determination, equipment, tests and regulations, interference, appr
- IR.VI.B.K4: A stabilized approach, including energy management concepts.
- IR.VI.B.R1: Deviating from the assigned approach procedure.
- IR.VI.B.R2: Selecting a navigation frequency.
- IR.VI.B.R3: Management of automated navigation and autoflight systems.
- IR.VI.B.R4: Aircraft configuration during an approach and missed approach.
- IR.VI.B.R5: An unstable approach, including excessive descent rates.
- IR.VI.B.R6: Deteriorating weather conditions on approach.
- IR.VI.B.R7: Continuing to descend below the Decision Altitude (DA)/Decision Height (DH) when the required visual references are not visible.
- IR.VI.B.S1: Accomplish the precision instrument approach(es) selected by the evaluator.
- IR.VI.B.S2: Establish two-way communications with air traffic control (ATC) appropriate for the phase of flight or approach segment, and use proper comm
- IR.VI.B.S3: Select, tune, identify, and confirm the operational status of navigation equipment to be used for the approach.
- IR.VI.B.S4: Comply with all clearances issued by ATC or the evaluator.
- IR.VI.B.S5: Recognize if any flight instrumentation is inaccurate or inoperative, and take appropriate action.
- IR.VI.B.S6: Advise ATC or the evaluator if unable to comply with a clearance.
- IR.VI.B.S7: Complete the appropriate checklist(s).
- IR.VI.B.S8: Establish the appropriate aircraft configuration and airspeed considering meteorological and operating conditions.
- IR.VI.B.S9: Maintain altitude ±100 feet, selected heading ±10°, airspeed ±10 knots, no more than ¾ scale CDI deflection, and accurately track radials, c
- IR.VI.B.S10: Adjust the published DA/DH and visibility criteria for the aircraft approach category, as appropriate, to account for NOTAMS, inoperative ai
- IR.VI.B.S11: Establish a predetermined rate of descent at the point where vertical guidance begins, which approximates that required for the aircraft to
- IR.VI.B.S12: Maintain a stabilized final approach from the final approach fix (FAF) to DA/DH allowing no more than ¾-scale deflection of either the verti
- IR.VI.B.S13: Immediately initiate the missed approach procedure when at the DA/DH, and the required visual references for the runway are not unmistakably
- IR.VI.B.S14: Transition to a normal landing approach (missed approach for seaplanes) only when the airplane is in a position from which a descent to a la
- IR.VI.B.S15: Maintain a stabilized visual flight path from the DA/DH to the runway aiming point where a normal landing may be accomplished within the tou
- IR.VI.B.S16: Use a multi-function display (MFD) and other graphical navigation displays, if installed, to monitor position, track wind drift, and to main
- IR.VI.B.S17: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IR.VI.C: Missed Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing a missed approach procedure solely by reference to instruments.
16 elements
- IR.VI.C.K1: Elements related to missed approach procedures and limitations associated with standard instrument approaches, including while using a fligh
- IR.VI.C.R1: Deviations from prescribed procedures or ATC instructions.
- IR.VI.C.R2: Holding, diverting, or electing to fly the approach again.
- IR.VI.C.R3: Aircraft configuration during an approach and missed approach.
- IR.VI.C.R4: Factors that might lead to executing a missed approach procedure before the MAP or to a go-around below DA, DH, or MDA, as applicable.
- IR.VI.C.R5: Management of automated navigation and autoflight systems.
- IR.VI.C.S1: Promptly initiate the missed approach procedure and report it to ATC.
- IR.VI.C.S2: Apply the appropriate power setting for the flight condition and establish a pitch attitude necessary to obtain the desired performance.
- IR.VI.C.S3: Configure the airplane in accordance with airplane manufacturer’s instructions, establish a positive rate of climb, and accelerate to the ap
- IR.VI.C.S4: Follow the recommended checklist items appropriate to the missed approach/go-around procedure.
- IR.VI.C.S5: Comply with the published or alternate missed approach procedure.
- IR.VI.C.S6: Advise ATC or the evaluator if unable to comply with a clearance, restriction, or climb gradient.
- IR.VI.C.S7: Maintain the recommended airspeed ±10 knots; heading, course, or bearing ±10°; and altitude(s) ±100 feet during the missed approach procedur
- IR.VI.C.S8: Use an MFD and other graphical navigation displays, if installed, to monitor position and track to help navigate the missed approach.
- IR.VI.C.S9: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
- IR.VI.C.S10: Request ATC clearance to attempt another approach, proceed to the alternate airport, holding fix, or other clearance limit, as appropriate,
IR.VI.D: Circling Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing a circling approach procedure.
16 elements
- IR.VI.D.K1: Elements related to circling approach procedures and limitations, including approach categories and related airspeed restrictions.
- IR.VI.D.R1: Prescribed circling approach procedures.
- IR.VI.D.R2: Executing a circling approach at night or with marginal visibility.
- IR.VI.D.R3: Losing visual contact with an identifiable part of the airport.
- IR.VI.D.R4: Management of automated navigation and autoflight systems.
- IR.VI.D.R5: Management of altitude, airspeed, or distance while circling.
- IR.VI.D.R6: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- IR.VI.D.R7: Executing a missed approach after the MAP while circling.
- IR.VI.D.S1: Comply with the circling approach procedure considering turbulence, windshear, and the maneuvering capability and approach category of the a
- IR.VI.D.S2: Confirm the direction of traffic and adhere to all restrictions and instructions issued by ATC or the evaluator.
- IR.VI.D.S3: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
- IR.VI.D.S4: Establish the approach and landing configuration. Maintain a stabilized approach and a descent rate that ensures arrival at the MDA, or the
- IR.VI.D.S5: Maintain airspeed ±10 knots, desired heading/track ±10°, and altitude +100/-0 feet until descending below the MDA or the preselected circlin
- IR.VI.D.S6: Visually maneuver to a base or downwind leg appropriate for the landing runway and environmental conditions.
- IR.VI.D.S7: If a missed approach occurs, turn in the appropriate direction using the correct procedure and appropriately configure the airplane.
- IR.VI.D.S8: If landing, initiate a stabilized descent. Touch down on the first one-third of the selected runway without excessive maneuvering, without e
IR.VI.E: Landing from an Instrument Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing procedures for a landing from an instrument approach.
12 elements
- IR.VI.E.K1: Elements related to the pilot’s responsibilities, and the environmental, operational, and meteorological factors that affect landing from a
- IR.VI.E.K2: Airport signs, markings, and lighting, including approach lighting systems.
- IR.VI.E.K3: Appropriate landing profiles and aircraft configurations.
- IR.VI.E.R1: Attempting to land from an unstable approach.
- IR.VI.E.R2: Flying below the glidepath.
- IR.VI.E.R3: Transitioning from instrument to visual references for landing.
- IR.VI.E.R4: Aircraft configuration for landing.
- IR.VI.E.S1: Transition at the DA/DH, MDA, or visual descent point (VDP) to a visual flight condition, allowing for safe visual maneuvering and a normal
- IR.VI.E.S2: Adhere to all ATC or evaluator advisories, such as NOTAMs, windshear, wake turbulence, runway surface, and other operational considerations.
- IR.VI.E.S3: Complete the appropriate checklist(s).
- IR.VI.E.S4: Maintain positive airplane control throughout the landing maneuver.
- IR.VI.E.S5: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.