Emergency Operations
PA.IX · 7 Tasks · 118 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
PA.IX.A: Emergency Descent
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with emergency descent.
16 elements
- PA.IX.A.K1: Situations that would require an emergency descent (e.g., depressurization, smoke, or engine fire).
- PA.IX.A.K2: Immediate action items and emergency procedures.
- PA.IX.A.K3: Airspeed, including airspeed limitations.
- PA.IX.A.K4: Aircraft performance and limitations.
- PA.IX.A.R1: Altitude, wind, terrain, obstructions, gliding distance, and available landing distance considerations.
- PA.IX.A.R2: Collision hazards.
- PA.IX.A.R3: Configuring the airplane.
- PA.IX.A.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- PA.IX.A.S1: Clear the area.
- PA.IX.A.S2: Establish and maintain the appropriate airspeed and configuration appropriate to the scenario specified by the evaluator and as covered in P
- PA.IX.A.S3: Maintain orientation, divide attention appropriately, and plan and execute a smooth recovery.
- PA.IX.A.S4: Use bank angle between 30° and 45° to maintain positive load factors during the descent.
- PA.IX.A.S5: Maintain appropriate airspeed +0/-10 knots, and level off at a specified altitude ±100 feet.
- PA.IX.A.S6: Complete the appropriate checklist(s).
- PA.IX.A.S7: Make radio calls as appropriate.
- PA.IX.A.S8: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
PA.IX.B: Emergency Approach and Landing (Simulated) (ASEL, ASES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with emergency approach and landing procedures.
21 elements
- PA.IX.B.K1: Immediate action items and emergency procedures.
- PA.IX.B.K2: Airspeed, including: Members
- PA.IX.B.K2a: a. Importance of best glide speed and its relationship to distance
- PA.IX.B.K2b: b. Difference between best glide speed and minimum sink speed
- PA.IX.B.K2c: c. Effects of wind on glide distance
- PA.IX.B.K3: Effects of atmospheric conditions on emergency approach and landing.
- PA.IX.B.K4: A stabilized approach, including energy management concepts.
- PA.IX.B.K5: Emergency Locator Transmitters (ELTs) and other emergency locating devices.
- PA.IX.B.K6: Air traffic control (ATC) services to aircraft in distress.
- PA.IX.B.R1: Altitude, wind, terrain, obstructions, gliding distance, and available landing distance considerations.
- PA.IX.B.R2: Following or changing the planned flightpath to the selected landing area.
- PA.IX.B.R3: Collision hazards.
- PA.IX.B.R4: Configuring the airplane.
- PA.IX.B.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- PA.IX.B.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- PA.IX.B.S1: Establish and maintain the recommended best glide airspeed, ±10 knots.
- PA.IX.B.S2: Configure the airplane in accordance with the Pilot's Operating Handbook (POH)\Airplane Flight Manual (AFM) and existing conditions.
- PA.IX.B.S3: Select a suitable landing area considering altitude, wind, terrain, obstructions, and available glide distance.
- PA.IX.B.S4: Plan and follow a flightpath to the selected landing area considering altitude, wind, terrain, and obstructions.
- PA.IX.B.S5: Prepare for landing as specified by the evaluator.
- PA.IX.B.S6: Complete the appropriate checklist(s).
PA.IX.C: Systems and Equipment Malfunctions
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with system and equipment malfunctions appropriate to the airplane provided for the practical test.
17 elements
- PA.IX.C.K1: Causes of partial or complete power loss related to the specific type of powerplant(s).
- PA.IX.C.K2: System and equipment malfunctions specific to the aircraft, including: Members
- PA.IX.C.K2a: a. Electrical malfunction
- PA.IX.C.K2b: b. Vacuum/pressure and associated flight instrument malfunctions Members
- PA.IX.C.K2c: c. Pitot-static system malfunction
- PA.IX.C.K2d: d. Electronic flight deck display malfunction
- PA.IX.C.K2e: e. Landing gear or flap malfunction
- PA.IX.C.K2f: f. Inoperative trim
- PA.IX.C.K3: Causes and remedies for smoke or fire onboard the aircraft. Members
- PA.IX.C.K4: Any other system specific to the aircraft (e.g., supplemental oxygen, deicing).
- PA.IX.C.K5: Inadvertent door or window opening.
- PA.IX.C.R1: Checklist usage for a system or equipment malfunction.
- PA.IX.C.R2: Distractions, task prioritization, loss of situational awareness, or disorientation.
- PA.IX.C.R3: Undesired aircraft state.
- PA.IX.C.R4: Startle response.
- PA.IX.C.S1: Determine appropriate action for simulated emergencies specified by the evaluator, from at least three of the elements or sub-elements liste Members
- PA.IX.C.S2: Complete the appropriate checklist(s).
PA.IX.D: Emergency Equipment and Survival Gear
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with emergency equipment, and survival gear appropriate to the airplane and environment encountered during flight.
14 elements
- PA.IX.D.K1: Emergency Locator Transmitter (ELT) operations, limitations, and testing requirements.
- PA.IX.D.K2: Fire extinguisher operations and limitations.
- PA.IX.D.K3: Emergency equipment and survival gear needed for: Members
- PA.IX.D.K3a: a. Climate extremes (hot/cold)
- PA.IX.D.K3b: b. Mountainous terrain
- PA.IX.D.K3c: c. Overwater operations
- PA.IX.D.K4: When to deploy a ballistic parachute and associated passenger briefings, if equipped.
- PA.IX.D.K5: When to activate an emergency auto-land system and brief passengers, if equipped.
- PA.IX.D.R1: Survival gear (water, clothing, shelter) for 48 to 72 hours.
- PA.IX.D.R2: Use of a ballistic parachute system.
- PA.IX.D.R3: Use of an emergency auto-land system, if installed.
- PA.IX.D.S1: Identify appropriate equipment and personal gear.
- PA.IX.D.S2: Brief passengers on proper use of on-board emergency equipment and survival gear.
- PA.IX.D.S3: Simulate ballistic parachute deployment procedures, if equipped.
PA.IX.E: Engine Failure During Takeoff Before VMC (Simulated) (AMEL, AMES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with engine failure during takeoff before minimum controllable airspeed (V ). MC
8 elements
- PA.IX.E.K1: Factors affecting minimum control airspeed with an inoperative engine (VMC).
- PA.IX.E.K2: VMC (red line) and best single-engine rate of climb airspeed (VYSE) (blue line).
- PA.IX.E.K3: Accelerate/stop distance.
- PA.IX.E.R1: Potential engine failure during takeoff.
- PA.IX.E.R2: Configuring the airplane.
- PA.IX.E.R3: Distractions, task prioritization, loss of situational awareness, or disorientation.
- PA.IX.E.S1: Close the throttles smoothly and promptly when a simulated engine failure occurs.
- PA.IX.E.S2: Maintain directional control and apply brakes (AMEL), or flight controls (AMES), as necessary.
PA.IX.F: Engine Failure After Liftoff (Simulated) (AMEL, AMES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with engine failure after liftoff.
21 elements
- PA.IX.F.K1: Factors affecting minimum controllable speed (VMC).
- PA.IX.F.K2: VMC (red line), VYSE (blue line), and safe single-engine speed (VSSE).
- PA.IX.F.K3: Accelerate/stop and accelerate/go distances.
- PA.IX.F.K4: How to identify, verify, feather, and secure an inoperative engine.
- PA.IX.F.K5: Importance of drag reduction, including propeller feathering, gear and flap retraction, the manufacturer’s recommended control input and its
- PA.IX.F.K6: Simulated propeller feathering and the evaluator’s zero-thrust procedures and responsibilities.
- PA.IX.F.R1: Potential engine failure after lift-off.
- PA.IX.F.R2: Collision hazards.
- PA.IX.F.R3: Configuring the airplane.
- PA.IX.F.R4: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- PA.IX.F.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- PA.IX.F.S1: Promptly recognize an engine failure, maintain control, and use appropriate emergency procedures.
- PA.IX.F.S2: Establish VYSE; if obstructions are present, establish best single-engine angle of climb speed (VXSE) or VMC +5 knots, whichever is greater,
- PA.IX.F.S3: Reduce drag by retracting landing gear and flaps in accordance with the manufacturer’s guidance.
- PA.IX.F.S4: Simulate feathering the propeller on the inoperative engine (evaluator should then establish zero thrust on the inoperative engine).
- PA.IX.F.S5: Use flight controls in the proper combination as recommended by the manufacturer, or as required to maintain best performance, and trim as r
- PA.IX.F.S6: Monitor the operating engine and aircraft systems and make adjustments as necessary.
- PA.IX.F.S7: Recognize the airplane’s performance capabilities. If a climb is not possible at VYSE, maintain VYSE and return to the departure airport for
- PA.IX.F.S8: Simulate securing the inoperative engine.
- PA.IX.F.S9: Maintain heading ±10° and airspeed ±5 knots.
- PA.IX.F.S10: Complete the appropriate checklist(s).
PA.IX.G: Approach and Landing with an Inoperative Engine (Simulated)(AMEL, AMES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with approach and landing with an engine inoperative, including engine failure on final approach.
21 elements
- PA.IX.G.K1: Factors affecting minimum controllable speed (VMC).
- PA.IX.G.K2: VMC (red line) and best single-engine rate of climb airspeed (VYSE) (blue line).
- PA.IX.G.K3: How to identify, verify, feather, and secure an inoperative engine.
- PA.IX.G.K4: Importance of drag reduction, including propeller feathering, gear and flap retraction, the manufacturer’s recommended control input and its
- PA.IX.G.K5: Applicant responsibilities during simulated feathering.
- PA.IX.G.R1: Potential engine failure inflight or during an approach.
- PA.IX.G.R2: Collision hazards.
- PA.IX.G.R3: Configuring the airplane.
- PA.IX.G.R4: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- PA.IX.G.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- PA.IX.G.R6: Possible single-engine go-around.
- PA.IX.G.S1: Promptly recognize an engine failure and maintain positive aircraft control.
- PA.IX.G.S2: Set the engine controls, reduce drag, identify and verify the inoperative engine, and simulate feathering of the propeller on the inoperativ
- PA.IX.G.S3: Use flight controls in the proper combination as recommended by the manufacturer, or as required to maintain best performance, and trim as r
- PA.IX.G.S4: Follow the manufacturer’s recommended emergency procedures and complete the appropriate checklist.
- PA.IX.G.S5: Monitor the operating engine and aircraft systems and make adjustments as necessary.
- PA.IX.G.S6: Maintain the manufacturer’s recommended approach airspeed +10/-5 knots, in the landing configuration with a stabilized approach, until landi
- PA.IX.G.S7: Make smooth, timely, and correct control application before, during, and after touchdown.
- PA.IX.G.S8: Touch down on the first one-third of available runway/landing surface, with no drift, and the airplane’s longitudinal axis aligned with and
- PA.IX.G.S9: Maintain directional control and appropriate crosswind correction throughout the approach and landing.
- PA.IX.G.S10: Complete the appropriate checklist(s).