Emergency Operations
AA.VII · 7 Tasks · 150 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
AA.VII.A: Emergency Procedures Members
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with emergency procedures.
21 elements
- AA.VII.A.K1: Declaring an emergency and selection of a suitable airport or landing location.
- AA.VII.A.K2: Situations that would require an emergency descent (e.g., depressurization, smoke, or engine fire). Members
- AA.VII.A.K3: Causes of inflight fire or smoke.
- AA.VII.A.K4: Airplane decompression. Members
- AA.VII.A.K5: When an emergency evacuation may be necessary.
- AA.VII.A.K6: Actions required if icing conditions exceed the capabilities of the aircraft.
- AA.VII.A.R1: Selection of the procedures or checklists to follow in an emergency.
- AA.VII.A.R2: Multiple failures or system abnormalities.
- AA.VII.A.R3: Altitude, wind, terrain, and obstruction considerations in an emergency.
- AA.VII.A.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VII.A.S1: Explain or describe an emergency procedure for a situation(s) presented by the evaluator.
- AA.VII.A.S2: Use proper procedures for an emergency situation(s) presented by the evaluator, such as: Members
- AA.VII.A.S2a: a. Emergency Descent
- AA.VII.A.S2b: b. Inflight fire and smoke
- AA.VII.A.S2c: c. Decompression Members
- AA.VII.A.S2d: d. Emergency evacuation
- AA.VII.A.S2e: e. Airframe icing
- AA.VII.A.S2f: f. Others as specified in the Airplane Flight Manual (AFM)/Pilot's Operating Handbook (POH)
- AA.VII.A.S3: Fly by reference to standby flight instruments, backup instrumentation, or partial panel, if applicable and appropriate to the situation.
- AA.VII.A.S4: Coordinate with crew, if applicable, and complete the appropriate checklist(s) in a timely manner.
- AA.VII.A.S5: Communicate with air traffic control (ATC) and the evaluator, as appropriate for the situation.
AA.VII.B: Powerplant Failure During Takeoff
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with powerplant failure during takeoff.
17 elements
- AA.VII.B.K1: The procedures used during a powerplant(s) failure on takeoff, the appropriate reference airspeeds, and the specific pilot actions required.
- AA.VII.B.K2: Operational considerations, including: airplane performance (e.g., sideslip, bank angle, rudder input), takeoff warning systems, runway leng
- AA.VII.B.R1: Planning for a potential powerplant failure during takeoff considering operational factors (e.g., takeoff warning inhibit systems, other air
- AA.VII.B.R2: Briefing the plan for a powerplant failure during takeoff, in a crew environment.
- AA.VII.B.R3: Selection of the procedures or checklists to follow in an emergency.
- AA.VII.B.R4: Identifying the inoperative engine (AMEL, AMES).
- AA.VII.B.R5: Inability to climb or maintain altitude with an inoperative powerplant (AMEL, AMES).
- AA.VII.B.R6: Altitude, wind, terrain, and obstruction considerations in an emergency.
- AA.VII.B.R7: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AA.VII.B.R8: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VII.B.S1: Following the powerplant failure, maintain positive airplane control and adjust the powerplant controls as recommended by the manufacturer f
- AA.VII.B.S2: Establish a power-off descent approximately straight-ahead if the powerplant failure occurs after becoming airborne and before reaching an a
- AA.VII.B.S3: Continue the takeoff if the (simulated) powerplant failure occurs at a point where the airplane can continue to a specified airspeed and alt
- AA.VII.B.S4: After establishing a climb, maintain the desired airspeed, ±5 knots. Use flight controls in the proper combination as recommended by the man
- AA.VII.B.S5: Maintain the appropriate heading, ±5°, when powerplant failure occurs (AMEL, AMES).
- AA.VII.B.S6: Coordinate with crew, if applicable, and complete the appropriate checklist(s) following the powerplant failure.
- AA.VII.B.S7: Communicate with air traffic control (ATC) and the evaluator, as appropriate for the situation.
AA.VII.C: Powerplant Failure (Simulated) (ASEL, ASES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with powerplant failure and associated emergency approach and landing procedures.
25 elements
- AA.VII.C.K1: Immediate action items and emergency procedures for a forced landing.
- AA.VII.C.K2: Airspeed, including: Members
- AA.VII.C.K2a: a. Importance of best glide speed and its relationship to distance
- AA.VII.C.K2b: b. Difference between best glide speed and minimum sink speed
- AA.VII.C.K2c: c. Effects of wind on glide distance
- AA.VII.C.K3: Effects of atmospheric conditions on emergency approach and landing.
- AA.VII.C.K4: A stabilized approach, including energy management concepts.
- AA.VII.C.K5: Emergency Locator Transmitters (ELTs) and other emergency locating devices.
- AA.VII.C.K6: Air traffic control (ATC) services to aircraft in distress.
- AA.VII.C.R1: Altitude, wind, terrain, obstructions, gliding distance, and available landing distance considerations.
- AA.VII.C.R2: Following or changing the planned flightpath to the selected landing area.
- AA.VII.C.R3: Collision hazards.
- AA.VII.C.R4: Configuring the airplane.
- AA.VII.C.R5: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AA.VII.C.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VII.C.R7: A powerplant failure in Instrument Meteorological Conditions (IMC).
- AA.VII.C.S1: Recognize the powerplant failure.
- AA.VII.C.S2: Determine the cause for the simulated powerplant failure (if altitude permits) and if a restart is a viable option.
- AA.VII.C.S3: Maintain positive control throughout the maneuver.
- AA.VII.C.S4: Establish and maintain the recommended best glide airspeed, ±5 knots.
- AA.VII.C.S5: Configure the airplane in accordance with the Pilot's Operating Handbook (POH)\Airplane Flight Manual (AFM) and existing conditions.
- AA.VII.C.S6: Select a suitable landing area considering altitude, wind, terrain, obstructions, and available glide distance. Members
- AA.VII.C.S7: Establish a proper flight path to the selected landing area.
- AA.VII.C.S8: Complete emergency checklist items appropriate to the airplane in a timely manner and as recommended by the manufacturer or operator.
- AA.VII.C.S9: Communicate with air traffic control (ATC) and the evaluator, as appropriate for the situation.
AA.VII.D: Inflight Powerplant(s) Failure and Restart (AMEL, AMES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with inflight powerplant failure and restart procedures, if applicable, in a multiengine airplane.
18 elements
- AA.VII.D.K1: Flight characteristics and controllability associated with maneuvering the airplane with powerplant(s) inoperative, including the importance
- AA.VII.D.K2: Powerplant restart procedures and conditions where a restart attempt is appropriate.
- AA.VII.D.R1: Powerplant(s) failure.
- AA.VII.D.R2: Methods for handling a powerplant failure or a powerplant restart.
- AA.VII.D.R3: Diagnosis of the cause of the powerplant failure.
- AA.VII.D.R4: Collision hazards.
- AA.VII.D.R5: Configuring the airplane.
- AA.VII.D.R6: Factors and situations that could lead to an inadvertent stall, spin, and loss of control with an inflight powerplant failure.
- AA.VII.D.R7: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VII.D.S1: Recognize and correctly identify powerplant(s) failure, complete memory items (if applicable), and maintain positive airplane control.
- AA.VII.D.S2: Coordinate with crew, if applicable, and complete the appropriate emergency procedures and checklist(s) for propeller feathering or powerpla
- AA.VII.D.S3: Use flight controls in the proper combination as recommended by the manufacturer, or as required to maintain best performance, and trim as r
- AA.VII.D.S4: Determine the cause for the powerplant(s) failure and if a restart is a viable option.
- AA.VII.D.S5: Maintain the operating powerplant(s) within acceptable operating limits.
- AA.VII.D.S6: Maintain airspeed ±10 knots, altitude ±100 feet, headings ±10°, as specified by the evaluator and within the airplane’s capability.
- AA.VII.D.S7: Consider a powerplant restart and, if appropriate, demonstrate the powerplant restart procedures in accordance with the manufacturer or oper
- AA.VII.D.S8: Select the nearest suitable airport or landing area.
- AA.VII.D.S9: Communicate with air traffic control (ATC) and the evaluator, as appropriate for the situation.
AA.VII.E: Approach and Landing with a Powerplant Failure (Simulated) (AMEL, AMES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with approach and landing with a powerplant failure in a multiengine airplane.
22 elements
- AA.VII.E.K1: Flight characteristics and controllability associated with maneuvering to a landing with inoperative powerplant(s).
- AA.VII.E.K2: Go-around/rejected landing procedures with a powerplant failure.
- AA.VII.E.K3: How to determine a suitable airport.
- AA.VII.E.R1: Planning for a powerplant failure inflight or during an approach.
- AA.VII.E.R2: Collision hazards.
- AA.VII.E.R3: Configuring the airplane.
- AA.VII.E.R4: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT). Members
- AA.VII.E.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VII.E.R6: Performing a go-around/rejected landing with a powerplant failure.
- AA.VII.E.S1: Recognize and correctly identify powerplant(s) failure, complete memory items (if applicable), and maintain positive airplane control.
- AA.VII.E.S2: Coordinate with crew, if applicable, and complete the appropriate emergency procedures and checklist(s) for simulated propeller feathering o
- AA.VII.E.S3: Use flight controls and configure the aircraft as required to maintain best performance or as recommended by the manufacturer.
- AA.VII.E.S4: Maintain the operating powerplant(s) within acceptable operating limits.
- AA.VII.E.S5: Communicate with air traffic control (ATC) and the evaluator, as appropriate for the situation.
- AA.VII.E.S6: Prior to beginning the final approach segment, maintain the desired altitude ±100 feet, the desired airspeed ±10 knots, the desired heading
- AA.VII.E.S7: Establish the recommended approach and landing configuration and airspeed, ±5 knots, and adjust pitch attitude and power as required to main
- AA.VII.E.S8: Maintain directional control and appropriate crosswind correction throughout the approach and landing.
- AA.VII.E.S9: Make smooth, timely, and correct control application before, during, and after touchdown.
- AA.VII.E.S10: Touch down at the appropriate speed and pitch attitude at the runway aiming point markings -250/+500 feet, or where there are no runway mark
- AA.VII.E.S11: During round out and touchdown contact the water at the proper pitch attitude within 200 feet beyond a specified point. In addition, for AME
- AA.VII.E.S12: Maintain positive aircraft control throughout the landing using drag and braking devices, as appropriate, to come to a stop.
- AA.VII.E.S13: Coordinate with crew, if applicable, and complete after landing checklists.
AA.VII.F: Precision Approach (Manually Flown) with a Powerplant Failure (Simulated) (AMEL, AMES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with precision approach (manually flown) with a powerplant failure in a multiengine airplane.
27 elements
- AA.VII.F.K1: Flight characteristics and controllability associated with maneuvering to a landing with inoperative powerplant(s).
- AA.VII.F.K2: Missed approach considerations with a powerplant failure.
- AA.VII.F.K3: How to determine a suitable airport.
- AA.VII.F.R1: Planning for a powerplant failure inflight or during an approach.
- AA.VII.F.R2: Collision hazards.
- AA.VII.F.R3: Configuring the airplane.
- AA.VII.F.R4: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AA.VII.F.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VII.F.R6: Landing with a powerplant failure.
- AA.VII.F.R7: Missed approach with a powerplant failure.
- AA.VII.F.R8: Maneuvering in instrument meteorological conditions (IMC) with a powerplant failure.
- AA.VII.F.S1: Recognize and correctly identify powerplant(s) failure, complete memory items (if applicable), and maintain positive airplane control.
- AA.VII.F.S2: Coordinate with crew, if applicable, and complete the appropriate emergency procedures and checklist(s) for simulated propeller feathering o
- AA.VII.F.S3: Use flight controls and configure the aircraft as required to maintain best performance or as recommended by the manufacturer.
- AA.VII.F.S4: Maintain the operating powerplant(s) within acceptable operating limits.
- AA.VII.F.S5: Make radio calls as appropriate.
- AA.VII.F.S6: Proceed toward the nearest suitable airport.
- AA.VII.F.S7: Coordinate with crew, if applicable, and complete the approach and landing checklists.
- AA.VII.F.S8: Establish the appropriate airplane configuration and airspeed considering meteorological and operating conditions.
- AA.VII.F.S9: Prior to beginning the final approach segment, maintain the desired altitude ±100 feet, the desired airspeed ±10 knots, the desired heading
- AA.VII.F.S10: Apply adjustments to the published decision altitude (DA)/decision height (DH) and visibility criteria for the aircraft approach category, a
- AA.VII.F.S11: Establish a predetermined rate of descent at the point where vertical guidance begins, which approximates that required for the aircraft to
- AA.VII.F.S12: Fly and maintain a stabilized approach, adjusting pitch and power as required, allowing no more than ¼-scale deflection of either the vertic
- AA.VII.F.S13: Maintain a stabilized final approach from the final approach fix (FAF) to the DA/DH allowing no more than ¼-scale deflection of either the v
- AA.VII.F.S14: Maintain directional control and appropriate crosswind correction throughout the approach and landing or missed approach.
- AA.VII.F.S15: Upon reaching the DA/DH, immediately initiate the missed approach procedures if the required visual references for the runway are not distin
- AA.VII.F.S16: Make smooth, timely, and correct control application before, during, and after touchdown or during the missed approach.
AA.VII.G: Landing from a No Flap or a Nonstandard Flap Approach
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with no flap or a nonstandard flap approach and landing.
20 elements
- AA.VII.G.K1: Airplane flight characteristics when flaps, leading edge devices, and other similar devices malfunction or become inoperative.
- AA.VII.G.K2: Other airplane system limitations when landing at a high speed.
- AA.VII.G.K3: How to determine required landing distance and a suitable runway for landing.
- AA.VII.G.R1: Hazards associated with a no flap or nonstandard flap approach and landing, including an asymmetrical flap situation.
- AA.VII.G.R2: Selection of a runway based on aircraft limitations, available distance, surface conditions, and wind. Members
- AA.VII.G.R3: Wake turbulence.
- AA.VII.G.R4: Go-around/rejected landing.
- AA.VII.G.R5: Collision hazards.
- AA.VII.G.R6: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AA.VII.G.R7: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AA.VII.G.S1: Identify the malfunction.
- AA.VII.G.S2: Coordinate with crew, if applicable, and complete applicable checklist(s) for the malfunction, approach, and landing.
- AA.VII.G.S3: Communicate with ATC as needed and select an airport/runway with sufficient length for landing.
- AA.VII.G.S4: Calculate the correct airspeeds/V-speeds for approach and landing.
- AA.VII.G.S5: Establish the recommended approach and landing configuration, airspeed, and trim, and adjust pitch attitude and power as required to maintai
- AA.VII.G.S6: Select a suitable touchdown point considering wind, landing surface, and obstructions.
- AA.VII.G.S7: Make smooth, timely, and correct control application before, during, and after touchdown.
- AA.VII.G.S8: Touch down at an acceptable point on the runway that is agreed upon between the applicant and the evaluator. Touch down at the appropriate s
- AA.VII.G.S9: Touch down at an acceptable point on the landing surface. During round out and touchdown contact the water at the proper pitch attitude with
- AA.VII.G.S10: Maintain positive aircraft control throughout the landing using drag and braking devices, as appropriate, to come to a stop.