Performance and Ground Reference Maneuvers
AI.IX · 6 Tasks · 131 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
AI.IX.A: Steep Turns
20 elements
- AI.IX.A.K1: Purpose of and procedures for steep turn.
- AI.IX.A.K2: Pilot sensations and control forces.
- AI.IX.A.K3: Aerodynamics associated with steep turns, including: Members
- AI.IX.A.K3a: a. Maintaining coordinated flight
- AI.IX.A.K3b: b. Overbanking tendencies
- AI.IX.A.K3c: c. Maneuvering speed, including the impact of weight changes
- AI.IX.A.K3d: d. Load factor and accelerated stalls
- AI.IX.A.K3e: e. Rate and radius of turn
- AI.IX.A.K4: Common errors related to this Task.
- AI.IX.A.R1: Division of attention between aircraft control and orientation.
- AI.IX.A.R2: Collision hazards.
- AI.IX.A.R3: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.IX.A.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.IX.A.R5: Uncoordinated flight.
- AI.IX.A.S1: Clear the area.
- AI.IX.A.S2: Establish the manufacturer's recommended airspeed; or if one is not available, an airspeed not to exceed maneuvering speed (VA).
- AI.IX.A.S3: Roll into a coordinated 360° steep turn with approximately a 50° bank.
- AI.IX.A.S4: Perform the Task in the opposite direction.
- AI.IX.A.S5: Maintain the entry altitude ±100 feet, airspeed ±10 knots, bank ±5°, and roll out on the entry heading ±10°.
- AI.IX.A.S6: Analyze and correct common errors related to this Task.
AI.IX.B: Steep Spiral (ASEL, ASES)
19 elements
- AI.IX.B.K1: Purpose of and procedures for a proper steep spiral.
- AI.IX.B.K2: Relationship to emergency landing procedures.
- AI.IX.B.K3: Maintaining a constant radius about a point.
- AI.IX.B.K4: Effects of wind on ground track and relation to a ground reference.
- AI.IX.B.K5: Common errors related to this Task.
- AI.IX.B.R1: Division of attention between aircraft control and orientation. Members
- AI.IX.B.R2: Collision hazards.
- AI.IX.B.R3: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.IX.B.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.IX.B.R5: Uncoordinated flight.
- AI.IX.B.R6: Effects of wind.
- AI.IX.B.R7: Airframe or airspeed limitations.
- AI.IX.B.S1: Clear the area.
- AI.IX.B.S2: Select an altitude sufficient to continue through a series of at least three, 360° turns.
- AI.IX.B.S3: Establish and maintain a steep spiral, not to exceed 60° angle of bank, to maintain a constant radius about a suitable ground reference poin
- AI.IX.B.S4: Apply wind-drift correction to track a constant radius circle around selected reference point with bank not to exceed 60° a steepest point i
- AI.IX.B.S5: Divide attention between airplane control, traffic avoidance and the ground track while maintaining coordinated flight.
- AI.IX.B.S6: Maintain the specified airspeed, ±10 knots and roll out toward an object or specified heading, ±10°, and complete the maneuver no lower than
- AI.IX.B.S7: Analyze and correct common errors related to this Task.
AI.IX.C: Chandelles (ASEL, ASES)
25 elements
- AI.IX.C.K1: Purpose of and procedures for chandelles.
- AI.IX.C.K2: Aerodynamics associated with chandelles, including: Members
- AI.IX.C.K2a: a. Maintaining coordinated flight
- AI.IX.C.K2b: b. Overbanking tendencies
- AI.IX.C.K2c: c. Maneuvering speed, including the impact of weight changes
- AI.IX.C.K2d: d. Accelerated stalls
- AI.IX.C.K3: Appropriate airplane configuration for maximum performance climb.
- AI.IX.C.K4: Proper pitch control required for continuously decreasing airspeed.
- AI.IX.C.K5: Common errors related to this Task.
- AI.IX.C.R1: Division of attention between aircraft control and orientation.
- AI.IX.C.R2: Collision hazards.
- AI.IX.C.R3: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.IX.C.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.IX.C.R5: Uncoordinated flight.
- AI.IX.C.R6: Energy management.
- AI.IX.C.R7: Rate and radius of turn with confined area operations.
- AI.IX.C.S1: Clear the area.
- AI.IX.C.S2: Select an altitude that allows the maneuver to be performed no lower than 1,500 feet above ground level (AGL).
- AI.IX.C.S3: Establish the appropriate entry configuration, power, and airspeed.
- AI.IX.C.S4: Establish the angle of bank at approximately 30°.
- AI.IX.C.S5: Simultaneously apply power and pitch to maintain a smooth, coordinated climbing turn, in either direction, to the 90° point, with a constant
- AI.IX.C.S6: Begin a coordinated constant rate rollout from the 90° point to the 180° point maintaining power and a constant pitch attitude.
- AI.IX.C.S7: Complete rollout at the 180° point, ±10° just above a stall airspeed, and maintaining that airspeed momentarily avoiding a stall.
- AI.IX.C.S8: Resume a straight-and-level flight with minimum loss of altitude.
- AI.IX.C.S9: Analyze and correct common errors related to this Task.
AI.IX.D: Lazy Eights (ASEL, ASES)
24 elements
- AI.IX.D.K1: Purpose of and procedures for lazy eights.
- AI.IX.D.K2: Aerodynamics associated with lazy eights, including how to maintain coordinated flight.
- AI.IX.D.K3: Performance and airspeed limitations.
- AI.IX.D.K4: Phases of the lazy eight maneuver from entry to recovery.
- AI.IX.D.K5: Common errors related to this Task.
- AI.IX.D.R1: Division of attention between aircraft control and orientation.
- AI.IX.D.R2: Collision hazards.
- AI.IX.D.R3: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.IX.D.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.IX.D.R5: Uncoordinated flight.
- AI.IX.D.R6: Energy management.
- AI.IX.D.R7: Accelerated stalls.
- AI.IX.D.S1: Clear the area.
- AI.IX.D.S2: Select an altitude that allows the maneuver to be performed no lower than 1,500 feet above ground level (AGL).
- AI.IX.D.S3: Establish the recommended entry configuration, power, and airspeed.
- AI.IX.D.S4: Maintain coordinated flight throughout the maneuver.
- AI.IX.D.S5: Complete the maneuver in accordance with the following: Members
- AI.IX.D.S5a: a. Approximately 30° bank at the steepest point
- AI.IX.D.S5b: b. Constant change of pitch and roll rate and airspeed
- AI.IX.D.S5c: c. Altitude at 180° point, ±100 feet from entry altitude
- AI.IX.D.S5d: d. Airspeed at the 180° point, ±10 knots from entry airspeed
- AI.IX.D.S5e: e. Heading at the 180° point, ±10°
- AI.IX.D.S6: Continue the maneuver through the number of symmetrical loops specified, then resume straight-and-level flight.
- AI.IX.D.S7: Analyze and correct common errors related to this Task.
AI.IX.E: Ground Reference Maneuvers
21 elements
- AI.IX.E.K1: Purpose of and procedures for ground reference maneuvers.
- AI.IX.E.K2: Effects of wind on ground track and relation to a ground reference.
- AI.IX.E.K3: Effects of bank angle and groundspeed on rate and radius of turn. Members
- AI.IX.E.K4: Relationship of rectangular course to airport traffic pattern.
- AI.IX.E.K5: Common errors related to this Task.
- AI.IX.E.R1: Division of attention between aircraft control and orientation.
- AI.IX.E.R2: Collision hazards. Members
- AI.IX.E.R3: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.IX.E.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.IX.E.R5: Uncoordinated flight.
- AI.IX.E.S1: Clear the area.
- AI.IX.E.S2: Select a suitable ground reference area, line, or point as appropriate.
- AI.IX.E.S3: Plan the maneuver: Members
- AI.IX.E.S3a: a. Rectangular course: enter a left or right pattern, 600 to 1,000 feet above ground level (AGL) at an appropriate distance from the selecte Members
- AI.IX.E.S3b: b. S-turns: enter perpendicular to the selected reference line, 600 to 1,000 feet AGL at an appropriate distance from the selected reference
- AI.IX.E.S3c: c. Turns around a point: enter at an appropriate distance from the reference point, 600 to 1,000 feet AGL at an appropriate distance from th Members
- AI.IX.E.S4: Apply adequate wind-drift correction during straight and turning flight to maintain a constant ground track around a rectangular reference a Members
- AI.IX.E.S5: If performing S-Turns, reverse the turn directly over the selected reference line; if performing turns around a point, complete turns in eit
- AI.IX.E.S6: Divide attention between airplane control, traffic avoidance and the ground track while maintaining coordinated flight.
- AI.IX.E.S7: Maintain altitude ±100 feet; maintain airspeed ±10 knots.
- AI.IX.E.S8: Analyze and correct common errors related to this Task.
AI.IX.F: Eights on Pylons (ASEL, ASES)
22 elements
- AI.IX.F.K1: Purpose of and procedures for eights on pylons.
- AI.IX.F.K2: Aerodynamics associated with the eights on pylons, including coordinated and uncoordinated flight.
- AI.IX.F.K3: Pivotal altitude and factors that affect it.
- AI.IX.F.K4: Effect of wind on ground track.
- AI.IX.F.K5: Phases of the eights on pylons maneuver from entry to recovery.
- AI.IX.F.K6: Common errors related to this Task.
- AI.IX.F.R1: Division of attention between aircraft control and orientation.
- AI.IX.F.R2: Collision hazards.
- AI.IX.F.R3: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.IX.F.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.IX.F.R5: Uncoordinated flight.
- AI.IX.F.R6: Energy management.
- AI.IX.F.R7: Emergency landing considerations.
- AI.IX.F.S1: Clear the area.
- AI.IX.F.S2: Determine the approximate pivotal altitude.
- AI.IX.F.S3: Select suitable pylons that permits straight-and-level flight between the pylons.
- AI.IX.F.S4: Enter the maneuver in the correct direction and position using an appropriate altitude and airspeed.
- AI.IX.F.S5: Establish the correct bank angle for the conditions, not to exceed 40°.
- AI.IX.F.S6: Apply smooth and continuous corrections so that the line-of-sight reference line remains on the pylon.
- AI.IX.F.S7: Divide attention between accurate, coordinated airplane control and outside visual references. Members
- AI.IX.F.S8: Maintain pylon position using appropriate pivotal altitude, avoiding slips and skids.
- AI.IX.F.S9: Analyze and correct common errors related to this Task.