Emergency Operations
IR.VII · 4 Tasks · 54 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
IR.VII.A: Loss of Communications
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with loss of communications while operating solely by reference to instruments.
8 elements
- IR.VII.A.K1: Procedures to follow in the event of lost communication during various phases of flight, including techniques for reestablishing communicati
- IR.VII.A.R1: Possible reasons for loss of communication.
- IR.VII.A.R2: Deviation from procedures for lost communications.
- IR.VII.A.S1: Recognize a simulated loss of communication.
- IR.VII.A.S2: Simulate actions to re-establish communication.
- IR.VII.A.S3: Determine whether to continue to flight plan destination or deviate.
- IR.VII.A.S4: Determine appropriate time to begin an approach.
- IR.VII.A.S5: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IR.VII.B: One Engine Inoperative (Simulated) during Straight-and-Level Flight and Turns (AMEL, AMES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with flight solely by reference to instruments with one engine inoperative.
18 elements
- IR.VII.B.K1: Procedures used if engine failure occurs during straight-and-level flight and turns while on instruments.
- IR.VII.B.R1: Identification of the inoperative engine.
- IR.VII.B.R2: Inability to climb or maintain altitude with an inoperative engine.
- IR.VII.B.R3: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- IR.VII.B.R4: Distractions, task prioritization, loss of situational awareness, or disorientation.
- IR.VII.B.R5: Fuel management during single-engine operation.
- IR.VII.B.R6: Configuring the aircraft.
- IR.VII.B.S1: Promptly recognize an engine failure and maintain positive aircraft control.
- IR.VII.B.S2: Set the engine controls, reduce drag, identify and verify the inoperative engine, and simulate feathering of the propeller on the inoperativ
- IR.VII.B.S3: Establish the best engine-inoperative airspeed and trim the airplane.
- IR.VII.B.S4: Use flight controls in the proper combination as recommended by the manufacturer, or as required to maintain best performance, and trim as r
- IR.VII.B.S5: Verify the prescribed checklist procedures used for securing the inoperative engine.
- IR.VII.B.S6: Attempt to determine and resolve the reason for the engine failure.
- IR.VII.B.S7: Monitor engine functions and make necessary adjustments.
- IR.VII.B.S8: Maintain the specified altitude ±100 feet or minimum sink rate if applicable, airspeed ±10 knots, and the specified heading ±10°.
- IR.VII.B.S9: Assess the aircraft’s performance capability and decide an appropriate action to ensure a safe landing.
- IR.VII.B.S10: Maintain control and fly within the aircraft’s operating limitations.
- IR.VII.B.S11: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IR.VII.C: Instrument Approach and Landing with an Inoperative Engine (Simulated) (AMEL, AMES)
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with executing a published instrument approach solely by reference to instruments with one engine inoperative.
20 elements
- IR.VII.C.K1: Instrument approach procedures with one engine inoperative.
- IR.VII.C.R1: Potential engine failure during approach and landing.
- IR.VII.C.R3: Configuring the airplane.
- IR.VII.C.R4: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- IR.VII.C.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- IR.VII.C.R6: Performing a go-around/rejected landing with an engine failure.
- IR.VII.C.S1: Promptly recognize an engine failure and maintain positive aircraft control.
- IR.VII.C.S2: Set the engine controls, reduce drag, identify and verify the inoperative engine, and simulate feathering of the propeller on the inoperativ
- IR.VII.C.S3: Use flight controls in the proper combination as recommended by the manufacturer, or as required to maintain best performance, and trim as r
- IR.VII.C.S4: Follow the manufacturer’s recommended emergency procedures and complete the appropriate checklist.
- IR.VII.C.S5: Monitor the operating engine and aircraft systems and make adjustments as necessary.
- IR.VII.C.S6: Request and follow an actual or a simulated air traffic control (ATC) clearance for an instrument approach.
- IR.VII.C.S7: Maintain altitude ±100 feet or minimum sink rate if applicable, airspeed ±10 knots, and selected heading ±10°.
- IR.VII.C.S8: Establish a rate of descent that ensures arrival at the minimum descent altitude (MDA) or decision altitude (DA)/decision height (DH) with t
- IR.VII.C.S9: On final approach segment, maintain vertical (as applicable) and lateral guidance within ¾-scale deflection.
- IR.VII.C.S10: Maintain control and fly within the aircraft’s operating limitations.
- IR.VII.C.S11: Comply with the published criteria for the aircraft approach category if circling.
- IR.VII.C.S12: Execute a landing.
- IR.VII.C.S13: Complete the appropriate checklist(s).
- IR.VII.C.S14: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
IR.VII.D: Approach with Loss of Primary Flight Instrument Indicators
To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing an approach solely by reference to instruments with the loss of primary flight control instruments.
8 elements
- IR.VII.D.K1: Recognizing if primary flight instruments are inaccurate or inoperative, and advising ATC or the evaluator.
- IR.VII.D.K2: Possible failure modes of primary instruments and how to correct or minimize the effect of the loss.
- IR.VII.D.R1: Use of secondary flight displays when primary displays have failed.
- IR.VII.D.R2: Maintaining aircraft control.
- IR.VII.D.R3: Distractions, task prioritization, loss of situational awareness, or disorientation.
- IR.VII.D.S1: Advise ATC or the evaluator if unable to comply with a clearance.
- IR.VII.D.S2: Complete a non-precision instrument approach without the use of the primary flight instruments using the skill elements of the non-precision
- IR.VII.D.S3: Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.