Launches and Landings

Commercial Pilot Balloon PTS · Area of Operation VII

  • CBH.VII
  • Area 7 of 11
  • 6 tasks
  • FAA-S-8081-18A
CBH.VII.A

Normal Launch Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a normal launch. 2. Directs ground crew to clear the area. 3. Recognizes equilibrium. 4. Uses tie-off-quick release line correctly, if appropriate. 5. Recognizes wind conditions and presence of false lift. 6. Appropriately controls lift-off and initial ascent.

CBH.VII.B

Launch Over Obstacle Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a launch over an obstacle. 2. Determines height of the obstacle. 3. Considers distance to the obstacle relative to the wind conditions. 4. Recognizes presence of false lift. 5. Lifts off and acts decisively so as to clear the obstacle safely.

CBH.VII.C

Approach to Landing Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of an approach to landing. 2. Considers the wind conditions, landing area, obstructions, and surface, and selects the most suitable touchdown point. 3. Stows loose articles and secures equipment, as appropriate. 4. Ensures that each occupant is thoroughly briefed and positioned properly in accordance with landing conditions. 5. Check fuel tanks for quantity and selection and completes an appropriate checklist. 6. Establishes the appropriate approach profile and rate(s) of descent. 7. Makes a timely decision to abort the approach, if necessary.

CBH.VII.D

Steep Approach to Landing Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a steep approach to landing. 2. Selects a landing site relative to wind speed and direction. 3. Briefs occupants and secures equipment. 4. Uses vents and burner controls properly to land balloon and control ground travel. 5. Exhibits timing, judgment, and control throughout the approach and landing. 6. Aborts landing, if requested by evaluator.

CBH.VII.E

Normal Landing Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a normal landing. 2. Prepares vent/deflation system for use. 3. Touches down within the selected area or aborts the landing and ascends, if requested by evaluator. 4. Uses burner controls and vent/deflation system properly to stabilize balloon on landing. 5. Stabilizes balloon prior to occupants exiting.

CBH.VII.F

High-Wind Landing Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a high-wind landing. 2. Ensures a thorough briefing to include positioning of occupants and securing of equipment. 3. Identifies hazards associated with a high-wind landing. 4. Selects a landing site appropriate for high-wind conditions. 5. Prepares vent/deflation system for use. 6. Uses burner controls and vent/deflation system to land the balloon and control ground travel. 7. Touches down within the selected area or aborts the landing and ascends, if requested by evaluator. 8. Extinguishes pilot lights and shuts off fuel, as appropriate.