Preflight Procedures

Commercial Pilot Balloon PTS · Area of Operation V

  • CBH.V
  • Area 5 of 11
  • 7 tasks
  • FAA-S-8081-18A
CBH.V.A

Launch Site Selection Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of launch site selection. 2. Arranges to launch at a suitable time, considering atmospheric conditions. 3. Selects a launch site with emphasis on— a. size and surface condition of site. b. consideration of accessibility and obstacles. c. surface wind and winds aloft. d. obstacles in vicinity of launch site. e. consideration of suitable landing areas based on wind conditions. 4. Makes a competent “go/no-go” decision considering all of the factors involved in the selection of a launch site.

CBH.V.B

Crew Briefing and Preparation Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of crew briefing and preparation. 2. Designates a crew chief, if appropriate, and explains duties and responsibilities to each crewmember. 3. Briefs crewmembers in all areas of the flight, including layout and assembly; tie-off, if appropriate; inflation; in-flight; landing; recovery; and emergency procedures. 4. Establishes a common means of communication such as hand signals and/or two-way radio. 5. Describes the proposed direction of flight and estimated time aloft. 6. Ensures that all necessary equipment is on board. 7. Supervises and coordinates all activities.

CBH.V.C

Layout and Assembly Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of layout and assembly. 2. Positions envelope and basket properly, considering wind conditions, surface, and obstacles. 3. Assembles fuel system (as appropriate) and checks for security, leaks, and correct fuel pressure. 4. Completes attachment of all cables and lines and assembles basket to envelope in accordance with the flight manual. 5. Completes an appropriate checklist.

CBH.V.D

Preflight Inspection Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a preflight inspection. This shall include the items which must be inspected, reasons for inspecting each item, and how to detect possible defects. 2. Inspects the balloon with reference to the checklist emphasizing the— a. basket and envelope, to include suspension and handling lines. b. venting and/or deflation systems. c. burner and fuel system check. d. instruments and gauges. 3. Verifies the balloon is in condition for safe flight. 4. Completes an appropriate checklist.

CBH.V.E

Inflation Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of inflation. 2. Accomplishes proper tie-off procedure, if appropriate. 3. Positions inflator for initial cold inflation. 4. Begins ignition and hot air inflation. 5. Inflates balloon to a vertical position. 6. Positions and secures the vent/deflation lines. 7. Completes an appropriate checklist.

CBH.V.F

Basket/Gondola Management Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of basket/gondola management. 2. Ensures all loose items in the basket/gondola are secured. 3. Briefs passengers on the proper boarding, in-flight, and landing behavior and procedures. 4. Organizes material and equipment in a logical, efficient manner.

CBH.V.G

Pre-Launch Check Members

To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a pre-launch check. 2. Reviews wind conditions, temperatures, and obstructions. 3. Performs final instrument check. 4. Ensures that vent/deflation lines are positioned and secured properly. 5. Accomplishes final coordination with ground crew, including signals and emergency procedures. 6. Accomplishes pre-launch checklist and confirms that the balloon is in safe operating condition. 7. Brings balloon to equilibrium. 8. Divides attention in and around the basket/gondola. 9. Ensures no conflict with traffic prior to launch. 10. Completes the appropriate checklist.