Commercial Pilot Balloon PTS
Commercial Pilot Practical Test Standards for Lighter-Than-Air Category
- FAA-S-8081-18A
- Nov 2023
- Balloon
The Commercial Pilot Practical Test Standards for Lighter-Than-Air Category (FAA-S-8081-18A) set the standards for the commercial pilot practical test in the balloon and airship classes. These pages cover the balloon Areas of Operation and Tasks only.
- Areas of Operation
- 11
- Tasks
- 51
- Sources checked
- Not recorded
Areas of Operation
CBH.IFundamentals of Instructing
The Learning Process · Human Behavior · The Teaching Process · +4 moreCBH.IITechnical Subjects
Aeromedical Factors · Visual Scanning and Collision Avoidance · Principles of Flight · +3 moreCBH.IIIPreflight Preparation
Certificates and Documents · Weather Information · Flight Planning · +2 moreCBH.IVPreflight Lesson on a Maneuver to Be Performed in Flight
Maneuver LessonCBH.VPreflight Procedures
Launch Site Selection · Crew Briefing and Preparation · Layout and Assembly · +4 moreCBH.VIAirport Operations
Radio CommunicationsCBH.VIILaunches and Landings
Normal Launch · Launch Over Obstacle · Approach to Landing · +3 moreCBH.VIIIPerformance Maneuvers
Ascents · Altitude Control · Descents · +7 moreCBH.IXNavigation
NavigationCBH.XEmergency Operations
Systems and Equipment Malfunctions · Emergency Equipment and Survival Gear · Water Landing · +1 moreCBH.XIPostflight Procedures
Recovery · Deflation and Pack-Up · Refueling
Every task, by Area
IFundamentals of Instructing7 tasks
CBH.I.AThe Learning ProcessTo determine that the applicant exhibits instructional knowledge of the elements of the learning process by describing: 1. The definition and characteristics of learning. 2. Practical application of the laws of learning. 3. Factors involved in how people learn. 4. Recognition and proper use of the various levels of learning. 5. Principles that are applied in learning a skill. 6. Factors of forgetting and retention. 7. How the transfer of learning affects the learning process. 8. How the formation of habit patterns affects the learning process.CBH.I.BHuman BehaviorTo determine that the applicant exhibits instructional knowledge of the elements of human behavior by describing: 1. Control of human behavior. 2. Development of learner potential. 3. Relationship of human needs to behavior and learning. 4. Relationship of defense mechanisms to learning and aeronautical decision-making. 5. General rules which a flight instructor should follow during training learners to ensure good human relations.CBH.I.CThe Teaching ProcessTo determine that the applicant exhibits instructional knowledge of the elements of the teaching process by describing: 1. Preparation of a lesson for a ground or flight instructional period. 2. Presentation of knowledge and skills, including the methods that are suitable in particular situations. 3. Application, by the learner, of the knowledge and skills presented by the instructor. 4. Review of the material presented and the evaluation of learner performance and accomplishment.CBH.I.DTeaching MethodsTo determine that the applicant exhibits instructional knowledge of the elements of teaching methods by describing: 1. The organization of a lesson, (i.e., introduction, development, and conclusion). 2. The lecture method. 3. The guided discussion method. 4. The demonstration-performance method. 5. Computer/video assisted instruction.CBH.I.ECritique and EvaluationTo determine that the applicant exhibits instructional knowledge of the elements of critique and evaluation by describing: 1. Purpose and characteristics of an effective critique. 2. Difference between critique and evaluation. 3. Characteristics of effective oral questions and what type to avoid. 4. Responses to learner questions. 5. Characteristics and development of effective written tests. 6. Characteristics and uses of performance tests, specifically, the FAA practical test standards and FAA airman certification standards.CBH.I.FFlight Instructor Characteristics and ResponsibilitiesTo determine that the applicant exhibits instructional knowledge of the elements of flight instructor characteristics and responsibilities by describing: 1. Characteristics and qualifications of a professional flight instructor. 2. Role of the flight instructor in dealing with learner stress, anxiety, and psychological abnormalities. 3. Flight instructor's responsibility with regard to learner pilot supervision and surveillance. 4. Flight instructor's authority and responsibility for endorsements and recommendations. 5. Flight instructor's responsibility in the conduct of the required FAA flight review.CBH.I.GPlanning Instructional ActivityTo determine that the applicant exhibits instructional knowledge of the elements of planning instructional activity by describing: 1. Development of a course of training. 2. Content and use of a training syllabus. 3. Purpose, characteristics, proper use, and items of a lesson plan. 4. Flexibility features of a course of training, syllabus, and lesson plan required to accommodate learners with varying backgrounds, levels of experience, and ability.
IITechnical Subjects6 tasks
CBH.II.AAeromedical FactorsTo determine that the applicant exhibits instructional knowledge of the elements of aeromedical factors by describing: 1. Hypoxia, its symptoms, effects, and corrective action. 2. Hyperventilation, its symptoms, effects, and corrective action. 3. Middle ear and sinus problems, their causes, effects, and corrective action. 4. Effects of alcohol and drugs, and their relationship to safety. 5. How evolved gas from scuba diving can affect a pilot during flight. 6. Fatigue, its effects and corrective action.CBH.II.BVisual Scanning and Collision AvoidanceTo determine that the applicant exhibits instructional knowledge of the elements of visual scanning and collision avoidance by describing: 1. Relationship between a pilot's physical or mental condition and vision. 2. Practice of “time sharing” of attention inside and outside the basket. 3. Appropriate visual scanning techniques. 4. Importance of controlling ascents and descents. 5. Situations which involve the greatest collision risk.CBH.II.CPrinciples of FlightTo determine that the applicant exhibits instructional knowledge of the elements of the principles of flight by describing: 1. Physical laws applicable to balloon flight. 2. Effects of changes in temperature and density altitude on maintaining equilibrium. 3. Effects of false lift during takeoff, landing, and wind shear penetration.CBH.II.DRegulations and PublicationsTo determine that the applicant exhibits instructional knowledge of the elements of regulations and publications, their purpose, general content, availability, and how to obtain revisions by describing: 1. 14 CFR parts 1, 61, 91 and 49 CFR part 830. 2. Flight information publications. 3. Advisory circulars. 4. Practical test standards/airman certification standards. 5. Balloon flight manual.CBH.II.ENational Airspace SystemTo determine that the applicant exhibits instructional knowledge of the elements of the national airspace system by describing: 1. Definitions and dimensions of Class A, B, C, D, E, and G airspace. 2. Pilot certification, weather, and equipment requirements for operating in Class A, B, C, D, E, and G airspace. 3. Special use airspace and other airspace areas.CBH.II.FLogbook Entries and Certificate EndorsementsTo determine that the applicant exhibits instructional knowledge of the elements of logbook entries and certificate endorsements by describing: 1. Required logbook entries for instruction given. 2. Logbook entry certifying learner’s completion of presolo knowledge test. 3. Required student pilot certificate endorsements and appropriate logbook entries. 4. Preparation of a recommendation for a pilot practical test, including appropriate logbook entry. 5. Required endorsement of a pilot logbook for satisfactory completion of the required FAA flight review. 6. Instructor record keeping.
IIIPreflight Preparation5 tasks
CBH.III.ACertificates and DocumentsTo determine that the applicant exhibits commercial pilot knowledge of the elements of certificates and documents by explaining: 1. Requirements for the issuance of pilot certificates and ratings, and the privileges and limitations of those certificates and ratings. 2. Medical requirements. 3. Airworthiness and registration certificates. 4. Balloon flight manuals. 5. Balloon maintenance/inspection requirements and associated records.CBH.III.BWeather InformationTo determine that the applicant exhibits commercial pilot knowledge of the elements of weather information by explaining: 1. Importance of a thorough weather check. 2. Sources available for obtaining weather information. 3. Use of weather reports, forecasts, and charts. 4. Use of PIREP's, SIGMET's, and G-AIRMET's. 5. Recognition of aviation weather hazards and their effects on balloon operations. 6. Factors to be considered in making a “go/no go” decision.CBH.III.CFlight PlanningTo determine that the applicant: 1. Exhibits commercial pilot knowledge of the elements of flight planning by presenting and explaining a preplanned flight of maximum duration, appropriate to the balloon used for the flight test, as previously assigned by the evaluator. The final flight plan shall include real-time weather. 2. Uses appropriate, current aeronautical charts and appropriate, current local road/street maps. 3. Constructs a flight profile and plots a course for intended route of flight based on winds aloft. 4. Selects appropriate VHF communication frequencies, if radio equipped. 5. Identifies airspace, obstructions, and terrain features. 6. Selects suitable landing areas. 7. Extracts and applies pertinent information from AIM, Chart Supplements, and NOTAMs, as appropriate.CBH.III.DPerformance and LimitationsTo determine that the applicant exhibits commercial pilot knowledge of the elements of performance and limitations, appropriate to the balloon used for the practical test, by explaining: 1. Use of performance charts, tables, and other data in determining performance in various phases of flight. 2. Computation of operating weight, maximum load, fuel quantity and endurance. 3. Determination of normal and maximum rates of ascent and descent and the altitude required to arrest a high rate of descent. 4. Determination of envelope temperatures, including never- exceed temperature and maximum continuous temperature. 5. Effects of atmospheric conditions on performance. 6. Factors to be considered in determining that the required performance is within the balloon's capabilities and limitations.CBH.III.EOperation of SystemsTo determine that the applicant exhibits commercial pilot knowledge of the elements of the operation of systems, as applicable to the balloon used for the practical test, by explaining: 1. Fuel system, burners, pilot lights, and associated gauges. 2. Flight instruments and gauges. 3. Venting and/or deflation systems. 4. Avionics/communications system, as appropriate.
IVPreflight Lesson on a Maneuver to Be Performed in Flight1 task
VPreflight Procedures7 tasks
CBH.V.ALaunch Site SelectionTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of launch site selection. 2. Arranges to launch at a suitable time, considering atmospheric conditions. 3. Selects a launch site with emphasis on— a. size and surface condition of site. b. consideration of accessibility and obstacles. c. surface wind and winds aloft. d. obstacles in vicinity of launch site. e. consideration of suitable landing areas based on wind conditions. 4. Makes a competent “go/no-go” decision considering all of the factors involved in the selection of a launch site.CBH.V.BCrew Briefing and PreparationTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of crew briefing and preparation. 2. Designates a crew chief, if appropriate, and explains duties and responsibilities to each crewmember. 3. Briefs crewmembers in all areas of the flight, including layout and assembly; tie-off, if appropriate; inflation; in-flight; landing; recovery; and emergency procedures. 4. Establishes a common means of communication such as hand signals and/or two-way radio. 5. Describes the proposed direction of flight and estimated time aloft. 6. Ensures that all necessary equipment is on board. 7. Supervises and coordinates all activities.CBH.V.CLayout and AssemblyTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of layout and assembly. 2. Positions envelope and basket properly, considering wind conditions, surface, and obstacles. 3. Assembles fuel system (as appropriate) and checks for security, leaks, and correct fuel pressure. 4. Completes attachment of all cables and lines and assembles basket to envelope in accordance with the flight manual. 5. Completes an appropriate checklist.CBH.V.DPreflight InspectionTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a preflight inspection. This shall include the items which must be inspected, reasons for inspecting each item, and how to detect possible defects. 2. Inspects the balloon with reference to the checklist emphasizing the— a. basket and envelope, to include suspension and handling lines. b. venting and/or deflation systems. c. burner and fuel system check. d. instruments and gauges. 3. Verifies the balloon is in condition for safe flight. 4. Completes an appropriate checklist.CBH.V.EInflationTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of inflation. 2. Accomplishes proper tie-off procedure, if appropriate. 3. Positions inflator for initial cold inflation. 4. Begins ignition and hot air inflation. 5. Inflates balloon to a vertical position. 6. Positions and secures the vent/deflation lines. 7. Completes an appropriate checklist.CBH.V.FBasket/Gondola ManagementTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of basket/gondola management. 2. Ensures all loose items in the basket/gondola are secured. 3. Briefs passengers on the proper boarding, in-flight, and landing behavior and procedures. 4. Organizes material and equipment in a logical, efficient manner.CBH.V.GPre-Launch CheckTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a pre-launch check. 2. Reviews wind conditions, temperatures, and obstructions. 3. Performs final instrument check. 4. Ensures that vent/deflation lines are positioned and secured properly. 5. Accomplishes final coordination with ground crew, including signals and emergency procedures. 6. Accomplishes pre-launch checklist and confirms that the balloon is in safe operating condition. 7. Brings balloon to equilibrium. 8. Divides attention in and around the basket/gondola. 9. Ensures no conflict with traffic prior to launch. 10. Completes the appropriate checklist.
VIILaunches and Landings6 tasks
CBH.VII.ANormal LaunchTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a normal launch. 2. Directs ground crew to clear the area. 3. Recognizes equilibrium. 4. Uses tie-off-quick release line correctly, if appropriate. 5. Recognizes wind conditions and presence of false lift. 6. Appropriately controls lift-off and initial ascent.CBH.VII.BLaunch Over ObstacleTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a launch over an obstacle. 2. Determines height of the obstacle. 3. Considers distance to the obstacle relative to the wind conditions. 4. Recognizes presence of false lift. 5. Lifts off and acts decisively so as to clear the obstacle safely.CBH.VII.CApproach to LandingTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of an approach to landing. 2. Considers the wind conditions, landing area, obstructions, and surface, and selects the most suitable touchdown point. 3. Stows loose articles and secures equipment, as appropriate. 4. Ensures that each occupant is thoroughly briefed and positioned properly in accordance with landing conditions. 5. Check fuel tanks for quantity and selection and completes an appropriate checklist. 6. Establishes the appropriate approach profile and rate(s) of descent. 7. Makes a timely decision to abort the approach, if necessary.CBH.VII.DSteep Approach to LandingTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a steep approach to landing. 2. Selects a landing site relative to wind speed and direction. 3. Briefs occupants and secures equipment. 4. Uses vents and burner controls properly to land balloon and control ground travel. 5. Exhibits timing, judgment, and control throughout the approach and landing. 6. Aborts landing, if requested by evaluator.CBH.VII.ENormal LandingTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a normal landing. 2. Prepares vent/deflation system for use. 3. Touches down within the selected area or aborts the landing and ascends, if requested by evaluator. 4. Uses burner controls and vent/deflation system properly to stabilize balloon on landing. 5. Stabilizes balloon prior to occupants exiting.CBH.VII.FHigh-Wind LandingTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a high-wind landing. 2. Ensures a thorough briefing to include positioning of occupants and securing of equipment. 3. Identifies hazards associated with a high-wind landing. 4. Selects a landing site appropriate for high-wind conditions. 5. Prepares vent/deflation system for use. 6. Uses burner controls and vent/deflation system to land the balloon and control ground travel. 7. Touches down within the selected area or aborts the landing and ascends, if requested by evaluator. 8. Extinguishes pilot lights and shuts off fuel, as appropriate.
VIIIPerformance Maneuvers10 tasks
CBH.VIII.AAscentsTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of ascents. 2. Transitions from level flight to ascent, as specified by the evaluator. 3. Ascends at a specified rate, ±50 feet per minute. 4. Transitions from ascent to level flight at an altitude specified by the evaluator, ±50 feet.CBH.VIII.BAltitude Control (Level Flight)To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of altitude control. 2. Recognizes vertical movement. 3. Maintains equilibrium by smooth use of burner controls. 4. Uses instruments to assist in altitude control. 5. Maintains assigned altitudes, ±50 feet.CBH.VIII.CDescentsTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of descents. 2. Transitions from level flight to descent, as specified by the evaluator. 3. Descends at a specified rate, ±50 feet per minute. 4. Transitions from descent to level flight at an altitude specified by the evaluator, ±50 feet.CBH.VIII.DRapid Ascent and DescentTo determine that the applicant exhibits commercial pilot knowledge of the elements of a rapid ascent and descent by explaining: 1. Situations requiring use of a rapid ascent and descent. 2. Exceeding manufacturer’s limitations. 3. Potential problems with envelope distortions. 4. Time and altitude required to recover from a rapid descent. 5. Reasons for monitoring temperature control during a rapid ascent and descent.CBH.VIII.EContour Flying (LBH)To determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of contour flying. 2. Uses controls properly to maintain the altitude desired based on appropriate clearance over terrain and obstacles, consistent with safety. 3. Considers effects of wind gusts, wind shear, thermal activity, and orographic conditions. 4. Avoids overburning and overventing. 5. Divides attention between balloon control, ground track, and visual scanning.CBH.VIII.FHigh Altitude Flight (LBG)To determine that the applicant exhibits commercial pilot knowledge of the elements of high altitude flight by explaining: 1. Regulatory requirements for use of oxygen. 2. Physiological effects of high altitude flight. 3. Effects of high altitude on fuel system and performance. 4. Density altitude and its effects on flight characteristics. 5. Difficulties associated with altitude control.CBH.VIII.GObstacle Avoidance (LBH)To determine that the applicant exhibits commercial pilot knowledge of the elements of obstacle avoidance by explaining: 1. Importance of timely recognition of obstacles, particularly power lines. 2. Techniques that can be used to avoid these obstacles. 3. Proper procedures to be used if collision is imminent.CBH.VIII.HTethering (LBH)To determine that the applicant exhibits commercial pilot knowledge of the elements of tethering by explaining: 1. Recommended procedures to include number, strength, and location of lines in accordance with flight manual. 2. Size of area required, considering wind conditions and obstructions. 3. Effects of false lift and wind gusts. 4. Importance of briefing ground crew on procedures, to include crowd control.CBH.VIII.IWinter FlyingTo determine that the applicant exhibits commercial pilot knowledge of the elements of winter flying by explaining: 1. Fuel pressure concerns and proper methods of pressurizing fuel tanks. 2. Equipment and preparation necessary for cold temperature operations. 3. Added concerns for fuel vaporization, leaks, and/or fire risk.CBH.VIII.JMountain FlyingTo determine that the applicant exhibits commercial pilot knowledge of the elements of mountain flying by explaining: 1. Proper preparation, equipment, and survival supplies necessary for flight over mountainous terrain. 2. Availability of and accessibility to landing areas. 3. Recognition of cloud formations and descending air currents on the leeward side of mountains as evidence of possible turbulence. 4. Caution required regarding windshear encounters and possible rapid weather changes.
XEmergency Operations4 tasks
CBH.X.ASystems and Equipment MalfunctionsTo determine that the applicant exhibits commercial pilot knowledge of the elements of systems and equipment malfunctions, appropriate to the balloon used for the practical test, by explaining recommended pilot action for: 1. Pilot light flameout or failure. 2. Blast valve failure. 3. Fuel exhaustion. 4. Propane leak and/or fire. 5. Any other malfunction that may occur.CBH.X.BEmergency Equipment and Survival GearTo determine that the applicant exhibits commercial pilot knowledge of the elements of emergency equipment and survival gear, appropriate to the balloon used for the practical test, by explaining: 1. Location and purpose. 2. Method of operation or use. 3. Equipment appropriate for operation in various climates and types of terrain.CBH.X.CWater LandingTo determine that the applicant exhibits commercial pilot knowledge of the elements of a water landing by explaining: 1. The emergency conditions under which water landings are necessary. 2. Consideration for wind effects and water current. 3. The preparation required for contact with water, to include briefing passengers. 4. The procedure to be used after water contact.CBH.X.DThermal FlightTo determine that the applicant exhibits commercial pilot knowledge of the elements of thermal flight by explaining: 1. The conditions that can cause thermal activity. 2. Recognition and effects of thermal activity on balloon flight. 3. The procedures that can be followed when encountering thermal activity.
XIPostflight Procedures3 tasks
CBH.XI.ARecoveryTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of a recovery. 2. Coordinates recovery with landowner, as appropriate. 3. Supervises ground crew during recovery, including vehicle and spectator control. 4. Ensures importance of minimizing property damage. 5. Completes the appropriate checklist.CBH.XI.BDeflation and Pack-UpTo determine that the applicant: 1. Exhibits commercial pilot knowledge by explaining the elements of deflation and pack-up. 2. Ensures the fuel system is secure. 3. Deflates envelope properly, considering wind conditions and obstacles. 4. Disassembles envelope and basket components, as appropriate. 5. Packs and stores envelope, basket and components, and fuel system, as appropriate. 6. Performs satisfactory postflight inspection. 7. Completes an appropriate checklist.CBH.XI.CRefueling (LBH)To determine that the applicant exhibits commercial pilot knowledge of the elements of refueling by explaining: 1. Physical properties of propane. 2. Propane cylinders and related parts. 3. Safety factors, to include ventilation. 4. Danger of explosion and burns. 5. Moisture contamination. 6. Proper method of filling cylinders.
Members
Lessons, audio and spaced practice on every task
Members get the full teaching section, practice questions and the FlyCurrent Score for this certificate.
See membership