Multiengine Operations
AI.XIII · 3 Tasks · 72 elements
Members rows are available in FlyCurrent. Sign in or Start free trial.
Tasks
AI.XIII.A: Maneuvering with One Engine Inoperative (AMEL, AMES)
20 elements
- AI.XIII.A.K1: Factors affecting minimum controllable speed (VMC).
- AI.XIII.A.K2: VMC (red line) and best single-engine rate of climb airspeed (VYSE) (blue line).
- AI.XIII.A.K3: How to identify, verify, feather, and secure an inoperative engine.
- AI.XIII.A.K4: Importance of drag reduction, including propeller feathering, gear and flap retraction, the manufacturer’s recommended control input and its
- AI.XIII.A.K5: Feathering, securing, unfeathering, and restarting.
- AI.XIII.A.K6: Common errors related to this Task.
- AI.XIII.A.R1: Potential engine failure during flight.
- AI.XIII.A.R2: Collision hazards.
- AI.XIII.A.R3: Configuring the airplane.
- AI.XIII.A.R4: Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
- AI.XIII.A.R5: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.XIII.A.S1: Recognize an engine failure, maintain control, use manufacturer’s memory item procedures, and use appropriate emergency procedures.
- AI.XIII.A.S2: Set the engine controls, identify and verify the inoperative engine, and feather the appropriate propeller.
- AI.XIII.A.S3: Use flight controls in the proper combination as recommended by the manufacturer, or as required to maintain best performance, and trim as r
- AI.XIII.A.S4: Attempt to determine and resolve the reason for the engine failure.
- AI.XIII.A.S5: Secure the inoperative engine and monitor the operating engine and make necessary adjustments.
- AI.XIII.A.S6: Restart the inoperative engine using manufacturer’s restart procedures.
- AI.XIII.A.S7: Maintain altitude ±100 feet or minimum sink rate if applicable, airspeed ±10 knots, and selected headings ±10°.
- AI.XIII.A.S8: Complete the appropriate checklist(s).
- AI.XIII.A.S9: Analyze and correct common errors related to this Task.
AI.XIII.B: VMC Demonstration (AMEL, AMES)
25 elements
- AI.XIII.B.K1: Purpose of the maneuver.
- AI.XIII.B.K2: Proper procedures for maneuver entry and safe recovery.
- AI.XIII.B.K3: Factors affecting VMC and how VMC differs from stall speed (VS).
- AI.XIII.B.K4: VMC (red line), VYSE (blue line), and safe single-engine speed (VSSE).
- AI.XIII.B.K5: Cause of loss of directional control at airspeeds below VMC.
- AI.XIII.B.K6: Common errors related to this Task.
- AI.XIII.B.R1: Configuring the airplane.
- AI.XIII.B.R2: Maneuvering with one engine inoperative.
- AI.XIII.B.R3: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.XIII.B.S1: Configure the airplane in accordance with the manufacturer’s recommendations, in the absence of the manufacturer’s recommendations, then at Members
- AI.XIII.B.S1a: a. Landing gear retracted
- AI.XIII.B.S1b: b. Flaps set for takeoff
- AI.XIII.B.S1c: c. Cowl flaps set for takeoff
- AI.XIII.B.S1d: d. Trim set for takeoff
- AI.XIII.B.S1e: e. Propellers set for high revolutions per minute (rpm)
- AI.XIII.B.S1f: f. Power on critical engine reduced to idle and propeller windmilling
- AI.XIII.B.S1g: g. Power on operating engine set to takeoff or maximum available power
- AI.XIII.B.S2: Establish a single-engine climb attitude with the airspeed at approximately 10 knots above VSSE.
- AI.XIII.B.S3: Establish a bank angle not to exceed 5° toward the operating engine, as required for best performance and controllability.
- AI.XIII.B.S4: Increase the pitch attitude slowly to reduce the airspeed at approximately 1 knot per second while applying increased rudder pressure as nee
- AI.XIII.B.S5: Recognize and recover at the first indication of loss of directional control, stall warning, or buffet.
- AI.XIII.B.S6: Recover promptly by simultaneously reducing power sufficiently on the operating engine, decreasing the angle of attack as necessary to regai
- AI.XIII.B.S7: Recover within 20° of entry heading.
- AI.XIII.B.S8: Advance power smoothly on the operating engine and accelerate to VSSE/VYSE, as appropriate, ±5 knots during recovery.
- AI.XIII.B.S9: Analyze and correct common errors related to this Task.
AI.XIII.C: Demonstration of Effects of Various Airspeeds and Configurations during Engine Inoperative
27 elements
- AI.XIII.C.K1: Purpose for and elements of demonstration of effects of various airspeeds and configurations during engine inoperative performance.
- AI.XIII.C.K2: Selection of appropriate altitude for the demonstration.
- AI.XIII.C.K3: Proper entry procedure to include pitch attitude, bank attitude, and airspeed.
- AI.XIII.C.K4: Effects on performance of airspeed changes at, above, and below VYSE.
- AI.XIII.C.K5: Effects on performance of various configurations including: Members
- AI.XIII.C.K5a: a. Landing gear extended
- AI.XIII.C.K5b: b. Wing flaps extended
- AI.XIII.C.K5c: c. Landing gear and wing flaps extended
- AI.XIII.C.K5d: d. Windmilling propeller on the inoperative engine
- AI.XIII.C.K6: Airspeed control throughout the demonstration.
- AI.XIII.C.K7: Smooth control technique and coordination throughout the demonstration.
- AI.XIII.C.K8: Common errors related to this Task.
- AI.XIII.C.R1: Altitude selection.
- AI.XIII.C.R2: Entry and recovery procedures.
- AI.XIII.C.R3: Loss of control or stall.
- AI.XIII.C.R4: Configuring the airplane.
- AI.XIII.C.R5: Collision hazards.
- AI.XIII.C.R6: Distractions, task prioritization, loss of situational awareness, or disorientation.
- AI.XIII.C.S1: Demonstrate, describe, and explain effects of various airspeeds and configurations during engine inoperative performance.
- AI.XIII.C.S2: Demonstrate smooth control inputs when transitioning between various airspeeds and configurations, which include: Members
- AI.XIII.C.S2a: a. Landing gear extended
- AI.XIII.C.S2b: b. Wing flaps extended
- AI.XIII.C.S2c: c. Landing gear and wing flaps extended
- AI.XIII.C.S2d: d. Windmilling propeller on the inoperative engine
- AI.XIII.C.S3: Maintain appropriate airspeed, attitude, and altitude combinations for the various configurations.
- AI.XIII.C.S4: Return to normal cruise flight at the altitude and heading specified by the evaluator.
- AI.XIII.C.S5: Analyze and correct common errors related to this Task.