Slow Flight and Stalls

Commercial Pilot Glider PTS · Area of Operation IX

  • CGX.IX
  • Area 9 of 11
  • 2 tasks
  • FAA-S-8081-23B
CGX.IX.A

Maneuvering at Minimum Control Airspeed Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to maneuvering at minimum control airspeed, including flight characteristics and controllability. 2. Establishes and maintains an airspeed at which any further increase in angle of attack or load factor would result in a stall in straight or turning flight. 3. Accomplishes coordinated flight with configuration(s) specified by the evaluator. 4. Adjusts the airspeed to avoid stalls in turbulent air or as bank is increased. 5. Applies control inputs in a smooth and coordinated manner 6. Uses proper procedures to avoid stalls when raising a lowered wing. 7. Maintains heading, ±10°, during straight flight, and the desired bank angle, ±5°, during turns.

CGX.IX.B

Stall Recognition and Recovery Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to stall recognition and recovery, including the aerodynamic factors and flight situations that may result in stalls and the hazards of stalling during uncoordinated flight. 2. Selects an entry altitude that will allow the maneuver to be completed no lower than 1,500 feet AGL. 3. Establishes and maintains a pitch attitude that will result in a stall during both straight and turning flight with and without flaps, spoilers, or dive brakes, as appropriate. 4. Maintains a bank angle of 15°/±5°, during turns. 5. Recovers promptly at the first indication of buffeting or rapid decay of control effectiveness. 6. Uses smooth and coordinated control applications throughout the maneuver.