Launches and Landings

Commercial Pilot Glider PTS · Area of Operation IV

  • CGX.IV
  • Area 4 of 11
  • 19 tasks
  • FAA-S-8081-23B
CGX.IV.A

Aerotow - Before Takeoff Check Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to the before takeoff check, including the reasons for checking the items and how to detect malfunctions. 2. Establishes a course of action with crewmembers, including signals, speeds, wind, and emergency procedures. 3. Ensures that the glider is in safe operating condition. 4. Checks towline hookup and release mechanism using the appropriate hook for the type of launch conducted. 5. Ensures no conflict with traffic prior to takeoff. 6. Completes the prescribed checklist, if applicable.

CGX.IV.B

Aerotow - Normal and Crosswind Takeoff Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to normal and crosswind takeoff, including configurations and tow positions. 2. Uses proper pre-launch signals for aerotow launch. 3. Lifts off at an appropriate airspeed. 4. Maintains proper position until towplane lifts off. 5. Maintains directional control and proper wind-drift correction throughout the takeoff. 6. Maintains proper alignment with the towplane. 7. Uses proper aerotow visual signals between the glider and towplane, as appropriate.

CGX.IV.C

Aerotow - Maintaining Tow Positions Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to high-tow (slightly above the wake) and low-tow (slightly below the wake) positions during various phases of aerotow. 2. Makes smooth and correct control applications to maintain vertical and lateral positions during high- and low- tow. 3. Transitions from high- to low-tow position through the wake while maintaining positive control. 4. Maintains proper tow position during turns. 5. Uses aerotow visual signals as appropriate and as directed by the evaluator.

CGX.IV.D

Aerotow - Slack Line Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to the causes, hazards, and corrections related to slack line. 2. Recognizes slack line and applies immediate, positive, and smooth corrective action to eliminate slack line in various situations.

CGX.IV.E

Aerotow - Boxing the Wake Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to boxing the wake (maneuvering around the wake). 2. Maneuvers the glider, while on tow, slightly outside the towplane’s wake in a rectangular, box-like pattern. 3. Maintains proper control and coordination.

CGX.IV.F

Aerotow - Tow Release Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to tow release, including related safety factors. 2. Maintains high-tow position with normal towline tension. 3. Clears the area before releasing the towline. 4. Releases the towline and confirms release by observing the towline. 5. Makes level or climbing turn.

CGX.IV.G

Aerotow - Abnormal Occurrences Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to aerotow abnormal occurrences, for various situations, such as— a. towplane power loss during takeoff. b. towline break. c. towplane power failure at altitude. d. glider release failure. e. glider and towplane release failure (oral only). f. canopy opening in flight. 2. Demonstrates simulated aerotow abnormal occurrences as required by the evaluator.

CGX.IV.H

Ground Tow (Auto or Winch) - Before Takeoff Check Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to the before takeoff check, including the reasons for checking the items and how to detect malfunctions. 2. Establishes a course of action with crewmembers, including signals, speeds, wind direction, and emergency procedures. 3. Ensures glider is in safe operating condition. 4. Checks towline hookup and release mechanism using the appropriate hook for the type of launch conducted. 5. Ensures no conflict with traffic prior to takeoff. 6. Completes the prescribed checklist, if applicable.

CGX.IV.I

Ground Tow (Auto or Winch) - Normal and Crosswind Takeoff Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to normal and crosswind takeoff, including related safety factors. 2. Uses proper signals for takeoff. 3. Maintains directional control during launch. 4. Lifts off at the proper airspeed. 5. Establishes proper initial climb pitch attitude. 6. Takes prompt action to correct high speed, low speed, or porpoising. 7. Maintains proper ground track during climb. 8. Releases in proper manner and confirms release.

CGX.IV.J

Ground Tow (Auto or Winch) - Abnormal Occurrences Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to ground tow abnormal occurrences for various situations, such as— a. overrunning the towline. b. towline break. c. inability to release towline. d. over and under speeding. e. porpoising. f. canopy opening in flight. 2. Demonstrates simulated ground tow abnormal occurrences, as required by the evaluator.

CGX.IV.K

Self-Launch - Engine Starting Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to engine starting, including various atmospheric conditions and awareness of other persons and property during start. 2. Accomplishes recommended starting procedures. 3. Completes appropriate checklists.

CGX.IV.L

Self-Launch - Taxiing Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to taxiing, including the effect of wind during taxiing and appropriate control positions. 2. Performs a brake check immediately after the glider begins moving. 3. Positions flight controls properly, considering the wind. 4. Controls direction and speed without excessive use of brakes. 5. Avoids other aircraft and hazards. 6. Complies with signals.

CGX.IV.M

Self-Launch - Before Takeoff Check Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to the before takeoff check, including the reasons for checking each item and to detect malfunctions. 2. Positions the glider properly considering other aircraft, wind, and surface conditions. 3. Ensures engine temperatures and pressures are suitable for run-up and takeoff. 4. Accomplishes before takeoff checks and ensures the glider is in safe operating condition. 5. Reviews airspeeds, takeoff distance, and emergency procedures. 6. Completes appropriate checklists.

CGX.IV.N

Self-Launch - Normal and Crosswind Takeoff and Climb Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to normal and crosswind takeoff and climb. 2. Positions flight controls for existing wind conditions. 3. Clears the area, taxies into takeoff position, and aligns the glider for departure. 4. Advances throttle smoothly to takeoff power. 5. Rotates at recommended airspeed and accelerates to appropriate climb speed, ±5 knots. 6. Maintains takeoff power to a safe maneuvering altitude, and then sets climb power. 7. Completes appropriate checklists.

CGX.IV.O

Self-Launch - Engine Shutdown in Flight Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to engine shutdown procedures in flight. 2. Sets power for proper engine cooling. 3. Establishes appropriate airspeed. 4. Sets electrical equipment. 5. Shuts down engine. 6. Feathers or positions propeller and stows, as applicable. 7. Selects proper static source, if applicable. 8. Completes appropriate checklists.

CGX.IV.P

Self-Launch - Abnormal Occurrences Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to self-launch abnormal occurrences, for various situations, such as— a. partial, complete power failure, and failure to gain restart. b. fire or smoke. c. electrical system malfunction. d. low fuel pressure. e. low oil pressure. f. engine overheat. g. canopy opening in flight. h. engine restart in flight. 2. Demonstrates simulated self-launch abnormal occurrences, as required by the evaluator.

CGX.IV.Q

Landings - Normal and Crosswind Landing Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to a normal and crosswind approach and landing procedures. 2. Adjusts flaps, spoilers, or dive brakes, as appropriate. 3. Maintains recommended approach airspeed, ±5 knots. 4. Maintains crosswind correction and directional control throughout the approach and landing. 5. Makes smooth, timely, and positive control application during the roundout and touchdown. 6. Touches down smoothly within the designated landing area, with no appreciable drift, and with the longitudinal axis aligned with the desired landing path, stopping short of and within 100 feet of a designated point. 7. Maintains control during the after-landing roll. 8. Completes appropriate checklists.

CGX.IV.R

Landings - Slips to Landing Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to forward, side, and turning slips to landing, with and without the use of drag devices. 2. Recognizes the situation where a slip should be used to land in a desired area. 3. Establishes a slip without the use of drag devices. 4. Maintains the desired ground track. 5. Maintains proper approach attitude. 6. Makes smooth, proper, and positive control applications during recovery from the slip. 7. Touches down smoothly within the designated landing area.

CGX.IV.S

Landings - Downwind Landing Members

To determine that the applicant: 1. Exhibits knowledge of the elements related to downwind landings, including safety related factors. 2. Adjusts flaps, spoilers, or dive brakes, as appropriate. 3. Maintains recommended approach airspeed, ±5 knots. 4. Uses proper downwind landing procedures. 5. Maintains proper directional control during touchdown and rollout. 6. Applies brake smoothly to bring glider to a stop.