Private Pilot Glider PTS
Private Pilot Practical Test Standards for Glider Category
- FAA-S-8081-22A
- Nov 2023
- Glider
The Private Pilot Practical Test Standards for Glider Category (FAA-S-8081-22A) set the standards for the private pilot practical test in the glider category. They list the Areas of Operation and the Tasks in which an applicant must show competency, and evaluators conduct the test to them.
- Areas of Operation
- 11
- Tasks
- 47
- Sources checked
- Not recorded
Areas of Operation
PGL.IPreflight Preparation
Certificates and Documents · Weather Information · Operation of Systems · +2 morePGL.IIPreflight Procedures
Assembly · Ground Handling · Preflight Inspection · +2 morePGL.IIIAirport and Gliderport Operations
Radio Communications · Traffic Patterns · Airport, Runway, and Taxiway Signs, Markings, and LightingPGL.IVLaunches and Landings
Aerotow - Before Takeoff Check · Aerotow - Normal and Crosswind Takeoff · Aerotow - Maintaining Tow Positions · +16 morePGL.VPerformance Airspeeds
Minimum Sink Airspeed · Speed-to-FlyPGL.VISoaring Techniques
Thermal Soaring · Ridge and Slope Soaring · Wave SoaringPGL.VIIPerformance Maneuvers
Straight Glides · Turns to Headings · Steep TurnsPGL.VIIINavigation
Flight Preparation and Planning · National Airspace SystemPGL.IXSlow Flight and Stalls
Maneuvering at Minimum Control Airspeed · Stall Recognition and RecoveryPGL.XEmergency Operations
Simulated Off-Airport Landing · Emergency Equipment and Survival GearPGL.XIPostflight Procedures
After-Landing and Securing
Every task, by Area
IPreflight Preparation5 tasks
PGL.I.ACertificates and DocumentsTo determine that the applicant: 1. Exhibits knowledge of the elements related to certificates and documents by explaining— a. pilot certificate privileges and limitations. b. medical fitness. c. pilot logbook or flight records. 2. Exhibits knowledge of the elements related to certificates and documents by locating and explaining— a. airworthiness and registration certificates. b. operating limitations, placards, and instrument markings. c. weight and balance data and equipment list. d. maintenance requirements, appropriate records, airworthiness directives, and compliance records.PGL.I.BWeather InformationTo determine that the applicant: 1. Exhibits knowledge of the elements related to weather information from various sources with emphasis on— a. use of weather reports, charts, and forecasts. b. significant weather prognostics. c. contents of a standard briefing and soaring forecast. 2. Exhibits knowledge of the relationship of the following factors to the lifting process— a. pressure and temperature lapse rates. b. atmospheric instability. c. thermal index and thermal production. d. cloud formation and identification. e. frontal weather. f. other lifting sources. 3. Explains hazards associated with flight in the vicinity of thunderstorms. 4. Makes a competent “go/no-go” decision based on available weather information.PGL.I.COperation of SystemsTo determine that the applicant: 1. Exhibits knowledge of the elements related to the operation of instruments and systems, including as appropriate— a. magnetic compass. b. yaw string or inclinometer. c. airspeed indicator and altimeter. d. variometer and total energy compensators. e. gyroscopic instruments. f. electrical. g. landing gear and brakes. h. avionics. i. high-lift and drag devices. j. oxygen equipment. 2. Correctly interprets information displayed on the instruments.PGL.I.DPerformance and LimitationsTo determine that the applicant: 1. Exhibits knowledge of the elements related to performance and limitations, including the use of charts, tables, data to determine performance, and the adverse effects of exceeding limitations. 2. Uses appropriate performance charts, tables, and data. 3. Computes weight and balance, and determines if the weight and center of gravity are within limits. 4. Explains the management of ballast and its effect on performance. 5. Describes the effect of various atmospheric conditions on the glider’s performance. 6. Explains the applicable performance speeds and their uses. 7. Describes the relationship between airspeeds and load factors.PGL.I.EAeromedical FactorsTo determine that the applicant exhibits knowledge of the elements related to aeromedical factors by explaining: 1. Symptoms, causes, effects, and corrective action of at least three (3) of the following— a. hypoxia. b. hyperventilation. c. middle ear and sinus problems. d. spatial disorientation. e. motion sickness. f. carbon monoxide poisoning (self-launch). g. stress and fatigue. h. dehydration and heatstroke. i. visual illusions. 2. Effects of alcohol and drugs, including over-the-counter drugs. 3. Effects of evolved gas from scuba diving on a pilot during flight.
IIPreflight Procedures5 tasks
PGL.II.AAssemblyTo determine that the applicant: 1. Exhibits knowledge of the elements related to assembly procedures. 2. Selects a suitable assembly area and provides sufficient crewmembers for assembly. 3. Follows an appropriate checklist. 4. Uses proper tools. 5. Handles components properly. 6. Cleans and lubricates parts, as appropriate. 7. Accounts for all tools and parts at the completion of assembly. 8. Performs post-assembly inspection, including a positive control check.PGL.II.BGround HandlingTo determine that the applicant: 1. Exhibits knowledge of the elements related to ground handling procedures. 2. Selects the appropriate ground handling procedures and equipment for existing conditions. 3. Determines the number of crewmembers needed. 4. Handles the glider in a manner that will not result in damage during movement. 5. Secures the glider and controls, as necessary, in proper position.PGL.II.CPreflight InspectionTo determine that the applicant: 1. Exhibits knowledge of the elements related to preflight inspection, including which items must be inspected, for what reasons, and how to detect possible defects. 2. Inspects the glider using the appropriate checklist. 3. Verifies the glider is in condition for safe flight, notes any discrepancies, and determines if maintenance is required. 4. Inspects the launch equipment, including towline, tow hitches, weak links, and release mechanism.PGL.II.DFlight Deck ManagementTo determine that the applicant: 1. Exhibits knowledge of the elements related to flight deck management procedures. 2. Organizes and arranges material and equipment in a manner making items readily available. 3. Briefs passengers on the use of safety belts, shoulder harnesses, and emergency procedures. 4. Utilizes all appropriate checklists.PGL.II.EVisual SignalsTo determine that the applicant: 1. Exhibits knowledge of the elements related to aero tow or ground tow visual signals, as appropriate. 2. Uses, interprets, and responds to prelaunch, launch, airborne, and emergency signals, as appropriate.
IIIAirport and Gliderport Operations3 tasks
PGL.III.ARadio CommunicationsTo determine that the applicant: 1. Exhibits knowledge of the elements related to radio communications, radio failure, and ATC light signals. 2. Selects appropriate frequencies for facilities to be used. 3. Transmits using recommended phraseology. 4. Acknowledges radio communications and complies with instructions. 5. Uses appropriate procedures for simulated radio communications failure. 6. Interprets and complies with ATC light signals.PGL.III.BTraffic PatternsTo determine that the applicant: 1. Exhibits knowledge of the elements related to traffic pattern procedures for gliders. 2. Follows established traffic pattern procedures. 3. Maintains awareness of other traffic in pattern. 4. Maintains proper ground track with crosswind correction, if necessary. 5. Crosses designated points at appropriate altitudes, unless conditions make such action impractical. 6. Selects touchdown and stop points. 7. Adjusts glidepath and track promptly to compensate for unexpected lift, sink, or changes in wind velocity. 8. Makes smooth, coordinated turns with a bank angle not to exceed 45° when turning final approach. 9. Adjusts flaps, spoilers, or dive brakes, as appropriate. 10. Recognizes and makes appropriate corrections for the effect of wind. 11. Completes the prescribed checklist, if applicable.PGL.III.CAirport, Runway, and Taxiway Signs, Markings, and LightingTo determine that the applicant: 1. Exhibits knowledge of the elements related to airport, runway, and taxiway signs, markings, lighting, and airport diagrams including hot spots. 2. Identifies, interprets, and complies with appropriate airport, runway, and taxiway signs, markings, and lighting.
IVLaunches and Landings19 tasks
PGL.IV.AAerotow - Before Takeoff CheckTo determine that the applicant: 1. Exhibits knowledge of the elements related to the before takeoff check, including the reasons for checking the items and how to detect malfunctions. 2. Establishes a course of action with crewmembers, including signals, speeds, wind, and emergency procedures. 3. Ensures that the glider is in safe operating condition. 4. Checks towline hookup and release mechanism using the appropriate hook for the type of launch conducted. 5. Ensures no conflict with traffic prior to takeoff. 6. Completes the prescribed checklist, if applicable.PGL.IV.BAerotow - Normal and Crosswind TakeoffTo determine that the applicant: 1. Exhibits knowledge of the elements related to normal and crosswind takeoff, including configurations and tow positions. 2. Uses proper signals for takeoff. 3. Lifts off at an appropriate airspeed. 4. Maintains proper position until towplane lifts off. 5. Maintains directional control and proper wind-drift correction throughout the takeoff. 6. Maintains proper alignment with the towplane.PGL.IV.CAerotow - Maintaining Tow PositionsTo determine that the applicant: 1. Exhibits knowledge of the elements related to high-tow (slightly above the wake) and low-tow (slightly below the wake) positions during various phases of aero tow. 2. Makes smooth and correct control applications to maintain vertical and lateral positions during high- and low-tow. 3. Transitions from high- to low-tow position through the wake while maintaining positive control. 4. Maintains proper tow position during turns.PGL.IV.DAerotow - Slack LineTo determine that the applicant: 1. Exhibits knowledge of the elements related to the causes, hazards, and corrections related to slack line. 2. Recognizes slack line and applies immediate, positive, and smooth corrective action to eliminate slack line in various situations.PGL.IV.EAerotow - Boxing the WakeTo determine that the applicant: 1. Exhibits knowledge of the elements related to boxing the wake (maneuvering around the wake). 2. Maneuvers the glider, while on tow, slightly outside the towplane’s wake in a rectangular, box-like pattern. 3. Maintains proper control and coordination.PGL.IV.FAerotow - Tow ReleaseTo determine that the applicant: 1. Exhibits knowledge of the elements related to tow release, including related safety factors. 2. Maintains high-tow position with normal towline tension. 3. Clears the area before releasing the towline. 4. Releases the towline and confirms release by observing the towline. 5. Makes level or climbing turn.PGL.IV.GAerotow - Abnormal OccurrencesTo determine that the applicant: 1. Exhibits knowledge of the elements related to aero tow abnormal occurrences, for various situations, such as— a. towplane power loss during takeoff. b. towline break. c. towplane power failure at altitude. d. glider release failure. e. glider and towplane release failure (oral only). 2. Demonstrates simulated aero tow abnormal occurrences as required by the examiner.PGL.IV.HGround Tow (Auto or Winch) - Before Takeoff CheckTo determine that the applicant: 1. Exhibits knowledge of the elements related to the before takeoff check, including the reasons for checking the items and how to detect malfunctions. 2. Establishes a course of action with crewmembers, including signals, speeds, wind direction, and emergency procedures. 3. Ensures glider is in safe operating condition. 4. Checks towline hookup and release mechanism using the appropriate hook for the type of launch conducted. 5. Ensures no conflict with traffic prior to takeoff. 6. Completes the prescribed checklist, if applicable.PGL.IV.IGround Tow (Auto or Winch) - Normal and Crosswind TakeoffTo determine that the applicant: 1. Exhibits knowledge of the elements related to normal and crosswind takeoff, including related safety factors. 2. Uses proper signals for takeoff. 3. Maintains directional control during launch. 4. Lifts off at the proper airspeed. 5. Establishes proper initial climb pitch attitude. 6. Takes prompt action to correct high speed, low speed, or porpoising. 7. Maintains proper ground track during climb. 8. Releases in proper manner and confirms release.PGL.IV.JGround Tow (Auto or Winch) - Abnormal OccurrencesTo determine that the applicant: 1. Exhibits knowledge of the elements related to ground tow abnormal occurrences for various situations, such as— a. overrunning the towline. b. towline break. c. inability to release towline. d. over- and under-speeding. e. porpoising. 2. Demonstrates simulated ground tow abnormal occurrences, as required by the examiner.PGL.IV.KSelf-Launch - Engine StartingTo determine that the applicant: 1. Exhibits knowledge of the elements related to engine starting, including various atmospheric conditions and awareness of other persons and property during start. 2. Accomplishes recommended starting procedures. 3. Completes appropriate checklists.PGL.IV.LSelf-Launch - TaxiingTo determine that the applicant: 1. Exhibits knowledge of the elements related to taxiing, including the effect of wind during taxiing and appropriate control positions. 2. Performs a brake check immediately after the glider begins moving. 3. Positions flight controls properly, considering the wind. 4. Controls direction and speed without excessive use of brakes. 5. Avoids other aircraft and hazards. 6. Complies with signals.PGL.IV.MSelf-Launch - Before Takeoff CheckTo determine that the applicant: 1. Exhibits knowledge of the elements related to the before takeoff check, including the reason for checking each item and to detect malfunctions. 2. Positions the glider properly considering other aircraft, wind, and surface conditions. 3. Ensures engine temperatures and pressures are suitable for run-up and takeoff. 4. Accomplishes before takeoff checks and ensures the glider is in safe operating condition. 5. Reviews airspeeds, takeoff distance, and emergency procedures. 6. Completes appropriate checklists.PGL.IV.NSelf-Launch - Normal and Crosswind Takeoff and ClimbTo determine that the applicant: 1. Exhibits knowledge of the elements related to normal and crosswind takeoff and climb. 2. Positions flight controls for existing wind conditions. 3. Clears the area, taxies into takeoff position, and aligns the glider for departure. 4. Advances throttle smoothly to takeoff power. 5. Rotates at recommended airspeed and accelerates to appropriate climb speed, +10/-5 knots. 6. Maintains takeoff power to a safe maneuvering altitude, then sets climb power. 7. Completes appropriate checklists.PGL.IV.OSelf-Launch - Engine Shutdown in FlightTo determine that the applicant: 1. Exhibits knowledge of the elements related to engine shutdown procedures in flight. 2. Sets power for proper engine cooling. 3. Establishes appropriate airspeed. 4. Sets electrical equipment. 5. Shuts down engine. 6. Feathers or positions propeller and stows, as applicable. 7. Selects proper static source, if applicable. 8. Completes appropriate checklists.PGL.IV.PSelf-Launch - Abnormal OccurrencesTo determine that the applicant: 1. Exhibits knowledge of the elements related to self-launch abnormal occurrences, for various situations, such as— a. partial, complete power failure, and failure to gain restart. b. fire or smoke. c. electrical system malfunction. d. low fuel pressure. e. low oil pressure. f. engine overheat. g. canopy opening in flight. h. engine restart in flight. 2. Demonstrates simulated self-launch abnormal occurrences, as required by the examiner.PGL.IV.QLandings - Normal and Crosswind LandingTo determine that the applicant: 1. Exhibits knowledge of the elements related to normal and crosswind approach and landing procedures. 2. Adjusts flaps, spoilers, or dive brakes, as appropriate. 3. Maintains recommended approach airspeed, +10/-5 knots. 4. Maintains crosswind correction and directional control throughout the approach and landing. 5. Makes smooth, timely, and positive control application during the roundout and touchdown. 6. Touches down smoothly within the designated landing area, with no appreciable drift, and with the longitudinal axis aligned with the desired landing path, stopping short of and within 200 feet (120 meters) of a designated point. 7. Maintains control during the after-landing roll. 8. Completes appropriate checklists.PGL.IV.RLandings - Slips to LandingTo determine that the applicant: 1. Exhibits knowledge of the elements related to forward, side, and turning slips to landing, with and without the use of drag devices. 2. Recognizes the situation where a slip should be used to land in a desired area. 3. Establishes a slip without the use of drag devices. 4. Maintains the desired ground track. 5. Maintains proper approach attitude. 6. Makes smooth, proper, and positive control applications during recovery from the slip. 7. Touches down smoothly within the designated landing area.PGL.IV.SLandings - Downwind LandingTo determine that the applicant: 1. Exhibits knowledge of the elements related to downwind landings, including safety related factors. 2. Adjusts flaps, spoilers, or dive brakes, as appropriate. 3. Maintains recommended approach airspeed, ±5 knots. 4. Uses proper downwind landing procedures. 5. Maintains proper directional control during touchdown and roll-out. 6. Applies brake smoothly to bring glider to a stop.
VPerformance Airspeeds2 tasks
PGL.V.AMinimum Sink AirspeedTo determine that the applicant: 1. Exhibits knowledge of the elements related to aerodynamic factors and use of minimum sink airspeed. 2. Determines the minimum sink airspeed for a given situation and maintains the selected speed, ±5 knots.PGL.V.BSpeed-to-FlyTo determine that the applicant: 1. Exhibits knowledge of the elements related to speed-to-fly, and its uses. 2. Determines the speed-to-fly for a given situation and maintains the speed, ±5 knots.
VISoaring Techniques3 tasks
PGL.VI.AThermal SoaringTo determine that the applicant: 1. Exhibits knowledge of the elements related to thermal soaring. 2. Recognizes the indications of, and the presence of, a thermal. 3. Analyzes the thermal structure and determines the direction to turn to remain within the thermal. 4. Exhibits coordinated control and planning when entering and maneuvering to remain within the thermal. 5. Applies correct techniques to re-enter the thermal, if lift is lost. 6. Remains oriented to ground references, wind, and other aircraft. 7. Maintains proper airspeeds in and between thermals.PGL.VI.BRidge and Slope SoaringTo determine that the applicant: 1. Exhibits knowledge of the elements related to ridge and slope soaring. 2. Recognizes terrain features and wind conditions which create orographic lift. 3. Enters the area of lift properly. 4. Estimates height and maintains a safe distance from the terrain. 5. Exhibits smooth, coordinated control and planning to remain within the area of lift. 6. Uses correct technique to re-enter the area of lift, if lift is lost. 7. Remains oriented to ground references, wind, and other aircraft. 8. Uses proper procedures and techniques when crossing ridges. 9. Maintains proper airspeeds.PGL.VI.CWave SoaringTo determine that the applicant: 1. Exhibits knowledge of the elements related to wave soaring. 2. Locates and enters the area of lift. 3. Exhibits smooth, coordinated control and planning to remain within the area of lift. 4. Uses correct technique to re-enter the area of lift, if lift is lost. 5. Remains oriented to ground references, wind, and other aircraft. 6. Recognizes and avoids areas of possible extreme turbulence. 7. Maintains proper airspeeds. 8. Coordinates with ATC, as appropriate.
VIIPerformance Maneuvers3 tasks
PGL.VII.AStraight GlidesTo determine that the applicant: 1. Exhibits knowledge of the elements related to straight glides, including the relationship of pitch attitude and airspeed. 2. Tracks toward a prominent landmark at a specified airspeed. 3. Demonstrates the effect of flaps, spoilers, or dive brakes, if equipped, in relation to pitch attitude and airspeed. 4. Exhibits smooth, coordinated control, and planning. 5. Maintains the specified heading, ±10°, and the specified airspeed, ±10 knots.PGL.VII.BTurns to HeadingsTo determine that the applicant: 1. Exhibits knowledge of the elements related to turns to headings, including the relationship of pitch attitude, bank angle, and airspeed. 2. Enters and maintains an appropriate rate of turn with smooth, proper, and coordinated control applications. 3. Maintains the desired airspeed, ±10 knots, and rolls out on the specified heading, ±10°.PGL.VII.CSteep TurnsTo determine that the applicant: 1. Exhibits knowledge of the elements related to steep turns, including load factor, effect on stall speed, and overbanking tendency. 2. Establishes the recommended entry airspeed. 3. Enters a turn maintaining a bank angle of 45°/±5°, with smooth and coordinated control applications. 4. Maintains desired airspeed, ±10 knots. 5. Recovers with smooth and coordinated control application within 10° of the desired heading.
VIIINavigation2 tasks
PGL.VIII.AFlight Preparation and PlanningTo determine that the applicant: 1. Exhibits knowledge of the elements related to flight preparations and planning. 2. Selects and uses current and appropriate aeronautical charts. 3. Plots a course and selects prominent en route checkpoints. 4. Constructs a flight profile to determine minimum flight altitude at go-ahead points. 5. Explains method of using lift sources and speeds effectively within and between lift sources. 6. Selects available landing area. 7. Describes coordination procedures with air traffic control, as appropriate.PGL.VIII.BNational Airspace SystemTo determine that the applicant exhibits knowledge of the elements related to the National Airspace System by explaining: 1. Basic VFR weather minimums for all classes of airspace. 2. Airspace classes and their dimensions, pilot certification, and glider equipment requirements for the following— a. Class A. b. Class B. c. Class C. d. Class D. e. Class E. f. Class G. 3. Special use airspace and other airspace areas.
IXSlow Flight and Stalls2 tasks
PGL.IX.AManeuvering at Minimum Control AirspeedTo determine that the applicant: 1. Exhibits knowledge of the elements related to maneuvering at minimum control airspeed, including flight characteristics and controllability. 2. Establishes and maintains the airspeed at which any further increase in angle of attack or change in configurations would result in a stall in straight or turning flight in various configurations and bank angles. 3. Adjusts the airspeed to avoid stalls in turbulent air or as bank is increased. 4. Applies control inputs in a smooth and coordinated manner. 5. Uses proper procedures to avoid stalls when raising a lowered wing. 6. Maintains heading, ±10°, during straight flight, and the desired bank angle, ±10°, during turns.PGL.IX.BStall Recognition and RecoveryTo determine that the applicant: 1. Exhibits knowledge of the elements related to stall recognition and recovery, including the aerodynamic factors and flight situations that may result in stalls and the hazards of stalling during uncoordinated flight. 2. Selects an entry altitude that will allow the maneuver to be completed no lower than 1,500 feet AGL. 3. Establishes and maintains a pitch attitude that will result in a stall during both straight and turning flight with and without flaps, spoilers, or dive brakes, as appropriate. 4. Maintains a specified bank angle of up to 15° of bank, ±10°, during turns. 5. Recovers at the stall. 6. Uses smooth and coordinated control applications throughout the maneuver.
XEmergency Operations2 tasks
PGL.X.ASimulated Off-Airport LandingTo determine that the applicant exhibits knowledge of the elements related to a simulated off-airport landing, including selection of a suitable landing area and the procedures used to accomplish an off-airport landing.PGL.X.BEmergency Equipment and Survival GearTo determine that the applicant exhibits knowledge of the elements related to emergency equipment and survival gear, appropriate to the glider used for the practical test, by describing: 1. Location in the glider. 2. Method of operation or use. 3. Servicing and storage. 4. Inspection, fitting, and use of parachutes. 5. Equipment and gear appropriate for operation in various climates and over various types of terrain.
Members
Lessons, audio and spaced practice on every task
Members get the full teaching section, practice questions and the FlyCurrent Score for this certificate.
See membership