PA.IV.F.R3aFAA-S-ACS-6C · Nov 2023Risk management
a. Rejected landing and go-around
Planning for: a. Rejected landing and go-around
Bottom line
Situations such as air traffic control (ATC) requirements, unexpected appearance of hazards on the runway, overtaking another airplane, wind shear, wake turbulence, mechanical failure, or an unstable approach are all reasons to discontinue a landing approach. The instant a pilot decides to go around, full or maximum allowable takeoff power should be applied smoothly, without hesitation, and held until flying speed and controllability are restored.
FAA references
- AFH ch. 9 (p. 9-11) — FAA-H-8083-3C
- AFH ch. 9 (p. 9-12) — FAA-H-8083-3C
- AFH ch. 9 (p. 9-10) — FAA-H-8083-3C
- AFH ch. 13 (p. 13-22) — FAA-H-8083-3C
- AIM 4-3-11 (Pilot Responsibilities When Conducting Land and Hold Short Operations (LAHSO)) — AIM Basic 2/20/25 w/ Change 1 (8/7/25) & Change 2 (1/22/26)
- AIM 5-4-21 (Missed Approach) — AIM Basic 2/20/25 w/ Change 1 (8/7/25) & Change 2 (1/22/26)
Build understanding you can use
Unlock the full lesson and continue studying this element.
- Full teaching sections: Hazard; How it shows up; Decision rules; Mitigations; The hazard
- Check your understanding with answers you can reveal